THIS IS MY SELECT

S3015 Rotating Scrap & Demolition Shear

Weight - Boom Mount

3,331 lb

Weight - Stick Mount

3,234 lb

Length

105 in

Browse Rental Attachments Search Used Attachments

REQUEST A QUOTE

Download Product Brochure

Document 1

View Current Deals

SPECIFICATIONS

Cat® Scrap and Demolition Shears are designed to make you money. An innovative, robust design and fast cycle times provide the production and reliability you need to be profitable. Cat shears are efficient and can handle everything from structural steel to mixed scrap. Cat shears are designed to get the job done.

FULL SPECIFICATIONS

Weight - Boom Mount

3,331 lb

Weight - Stick Mount

3,234 lb

Length

105 in

Height

36.2 in

Width

25.2 in

Jaw Width - Fixed

12 in

Jaw Width - Moving

3.9 in

Jaw Opening

15.7 in

Jaw Depth

15 in

Throat Force

273 ton-f

Apex Force

130 ton-f

Tip Force

69 ton-f

Cutting Circuit - Maximum Relief Pressure

5,075 psi

Cutting Circuit - Maximum Flow

33 gpm

Rotation Circuit - Maximum Relief Pressure

2,030 psi

Rotation Circuit - Maximum Flow

11 gpm

Stick Mounted - Maximum

18 tons

Stick Mounted - Minimum

12 tons

Boom Mounted - Minimum

7 tons

Boom Mounted - Maximum

10 tons

Cycle Time - Close

2 Seconds

STANDARD EQUIPMENT

POWER TRAIN - TRACTOR
- Cat C13 ACERT engine with MEUI™
- Cat engine brake
- Electric start, 24 Volt
- Air cleaner, dry type with precleaner
- Fan, hydraulic
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Guard, crankcase
- Muffler (only for less or non-regulated regions engine arrangement only)
- Starting aid, ether
- Braking system: - Primary and secondary, wet disc, hydraulic - Parking, hydraulic-released, spring-applied - Throttle lock
- Transmission: - 8-speed planetary power shift - ECPC control - APECS software - Programmable top gear selection - Transmission hold - Differential lock - Guard, power train - Standard tire spin reduction - Ground speed control - Machine speed limit - Differential lock protection
POWER TRAIN - SCRAPER
- Braking system: - Primary and secondary, wet disc, hydraulic
ELECTRICAL - TRACTOR
- Alternator, 150 Amp
- Batteries (4), 12V, 1,000 CCA, maintenance free, high output
- Electrical system, 24V
- Lighting system: - Headlights, halogen - Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
- Starting/charging receptacle
ELECTRICAL - SCRAPER
- Alarm, backup
- Lighting system: - Brake lights, LED - Turn signals with hazard function, LED
OPERATOR ENVIRONMENT - TRACTOR
- HVAC system, heat, AC, defrost
- Thermostat control of HVAC system
- Coat hook
- Lunchbox platform with holding strap
- Diagnostic connection (2)
- 12V power ports (2)
- Differential lock (1)
- Dome courtesy light
- Horn, electric
- T-Handle implement control
- Mirror, rearview
- Radio ready
- ROPS/FOPS cab, pressurized
- Keypad switches: - Throttle lock - Wipers/washers - Hazard lights - Retarding level select - Work lights on, off - Information mode on Messenger Display
- Safety tab rocker switches
- Seat belt, static two-piece
- Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
- Steering wheel, tilt, telescoping, padded
- Windows, right side emergency egress
- Windows, sliding
- Windows, laminated, zipped in
- Windshield wipers, front and rear windows, includes washers
- Door lock
- Messenger Display
- Gauges, warnings include: - Coolant temperature - Engine oil temperature - Hydraulic oil temperature - DPF temperature - Fuel level - Park brake - Implement lockout - Brake system - Regeneration required - Throttle lock - System voltage - Secondary steering - Bail down - Ejector auto - Differential lock - Apron float - Transmission hold - Cushion hitch - High beam lights - Action lamp - Engine speed, rpm - Gear selection - DEF fill levels
FLUIDS
- Extended Life Coolant to -37° C (-34° F)
OTHER STANDARD EQUIPMENT - TRACTOR
- Advanced cushion hitch
- Accumulators (cushion hitch) with Canadian Registration Number (CRN)
- Fast oil change
- Fenders, non-metallic
- Heater, engine coolant 120V
- Rims (2)
- Tow pin, front
- Vandalism locks
- Heater, engine coolant 120V
OTHER STANDARD EQUIPMENT - SCRAPER
- Bowl: - 18.4 m3 (24 yd3), heaped - 14.1 m3 (18.4 yd3), struck
- Vandalism locks
- Hydraulic position sensing cylinders (bowl lift and apron)

OPTIONAL EQUIPMENT

STEERING ARRANGEMENTS
- Secondary Steering Arrangement
INTEGRATED TECHNOLOGIES
- Sequence Assist Arrangement
- Load Assist
- Cat Grade Control with Load Assist
OTHER ATTACHMENTS
- Camera arrangement - WAVS
- Steering lock - external
- Cab beacon
- Air horn
- Air horn and beacon
- Fender, scraper
- Guard, overflow
- Wiring group
- Year of manufacture plate
WORK LIGHT ATTACHMENTS
- HID work lights
AMBIENT CAPABILITY ARRANGEMENTS
- Cooling, high ambient HRC
- Cooling, low ambient HRC
- Cooling, high ambient LRC
- Cooling, low ambient LRC
SERVICE INSTRUCTIONS
- Film arrangement - U.S. (ANSI)
- Film arrangement - International (ISO)

Cut More, Cut Faster

More productive by design. Shears are designed as a system solution to cut more tons per day and make you more money by balancing machine capabilities, shear cylinder size, jaw depth and opening, and leveler arm length.
Increase cut efficiency by up to 15 percent and reduce blade wear with the dual offset apex jaw design.
Accurately place the jaws in optimum cutting position without moving the machine with the standard 360° rotator on the S3000 Series.
Power is consistent through the entire cutting cycle.
The shears are optimized for Cat excavators to ensure proper matching, optimal cycle times, and range of motion.
Increase cutting efficiency with tapered spacer plates which reduce jamming and drag.
The cylinder rod is completely protected inside the frame reducing downtime and the risk of damage and allowing for a slimmer design for better visibility.
The jaw relief area allows material to fall away freely without hindering the next cutting cycle.

Long-Lasting Quality

Reduce maintenance costs with the new Bolt-on Piercing Tip. Dowels protect the bolts from stress that leads to loosening and a bushing equalizes force on both halves of the tip to help prevent splitting.
Work confidently with demanding hydraulic requirements. Major hydraulic components are built with a 4 to 1 safety factor and can withstand pressure spikes up to 20,000-psi (1378 bar).
Increase overall durability with the solid plate construction of the upper jaw.
The housing is designed with a 60 percent safety factor in yield strength and high-stress areas are built with extra thick plates.
The heel plate is constructed of AR400 high-wear resistant material to provide long life between weld build up and replacement.
Endure high forces with confidence with the oversized torque tube.

Easy to Maintain

Easily and safely complete maintenance tasks. Shears can be greased at ground level along with the machine stick cylinder pin and boom pin.
Reduce downtime with field serviceable swivels. Removing and resealing can be done quickly and easily while the shear is mounted to the machine, without the need to take it to a shop.
Service and adjust the pivot group without the need for any special tools. The side play can be easily adjusted by simply tightening the pin.
Easily change the tip and flip the blade in thirty minutes with standard tools.
Access the cylinder’s hoses and speed valve easily from the side of the shear. This feature eliminates the need for a cover that can fall off and need repaired.
You are supported. The Cat Dealer Network is your one point of contact for all your service needs.

Options to Meet Your Needs

Connecting your shear to a variety of machines has never been easier. Dual high-pressure ports allow the shear to attach to any compatible machine regardless of the hydraulic layout.
Meet your specific needs with straight and rotating configurations and boom and stick mount options.
- Straight – S2000 Series
  - Boom mounted
  - Used in secondary demolition and scrap applications
  - Rotator is eliminated, reducing maintenance costs
  - Larger shears can be used on smaller machine size classes
- Rotating – S3000 Series
  - Boom or Stick mounted
  - Used in scrap, primary, and secondary demolition applications
  - Provides optimal cycle times and positioning
- Boom Mounted – Ideal for scrap applications, boom mounted shears allow for easier handling and operation.
- Stick Mounted – Ideal for demolition applications, stick mounted shears are compatible with larger machines and provide a greater reach.