Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.
Detailed Equipment Specifications
Machine Class
6 Ton Mini Excavators
Weight
540.1 lb
245 kg
Interface Options: Top-Bottom
Pin On (Pin Grabber) / S-40
Overall Height
32.2 in
819 mm
Length
24 in
609 mm
Overall Width
22.6 in
574 mm
Rotation Speed
7 Seconds per 1 Full Rotation
Tilt Angle Range +/-
40 degrees left/right
Maximum Bucket Capacity
8.8 ft³
250 l
Maximum Bucket Width
47.2 in
1,200 mm
Optimal Hydraulic Flow
45-80 L/min (12-21 gpm)
Maximum Operating Pressure
3,626 psi
25,000 kPa
Required Hydraulics
1st Auxiliary
Tilting Torque
10,627 lb/ft
14,408.3 N·m
Turning Torque
2,876.5 lb/ft
3,900 N·m
Grapple Gripping Force, Opened to Maximum
1,596.1 ft·lbf
7.1 kN
Grapple Maximum Lifting Capacity
661.4 lb
300 kg
Grapple Maximum Opening
16.3 in
414 mm
Grapple Length
9.2 in
233 mm
Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS6 Positioning System
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinder with Load Hold Valve
Valves sustain holding pressures and prevent cylinder movement under load constraints.
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Grapple Attachment
Used to pick up objects such as pipe and debris.
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Compatibility Note
Only compatible with the following Next Gen machines and serial numbers:
