MD6310 Rotary Blasthole Drill 13.7 m or 17.5 m (44.9 ft or 57.4 ft) Mast Configuration

– Production<br>– Navigation

Wiring for third party interface

Drill assist (single or multipass auto drill) (options)

Product Link Elite (hardware from factory, subscription package via dealer)

Optional Command for Drilling enables each operator to manage more than one machine

Autonomy ready

Auto level, auto retract, auto mast

Drill depth indicator and interlocks

C32B @ 1,800 rpm

Down to 74.6 m (Down to 244.9 ft)

Down to 47.9 m (Down to 157.4 ft)

42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)

Up to 39 009 kg (Up to 86,000 lb)

Up to 41 165 kg (Up to 90,753 lb)

203-311 mm (8-12.25 in)

Vertical to 30° (in 5° increments)

203-311 mm (8-12.25 in)

Up to 42 149 kg (Up to 92,922 lb)

C32B @ 1,800 rpm

Up to 22 113 kg (Up to 48,750 lb)

Up to 22 113 kg (Up to 48,750 lb)

56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)

73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)

Up to 39 009 kg (Up to 86,000 lb)

178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)

13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>

194 mm (7.625 in), 219 mm (8.625 in)

178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in)

Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil

Rated down to –18° C (–0.4° F) temperatures

Rated down to –1° C (30° F) temperatures

Withstands high heat to 52° C (125° F)

Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed

Rated down to –40° C (–40° F) temperatures

Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately

Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks

Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank

High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE

Electronic compressor control and regulation with purged air lines

73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi)

Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE

With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption<br>– Both high and low pressure compressors contain this feature

56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)

42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi)

Functional in ambient temperature of 52° C (125° F)

Separate engine cooling module

Coolers with easy cleaning access

Automatic variable speed fan control

Replaceable cooler core sections

Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)<ul><li>Dual purpose pipe carousel accepts 194 mm (7.625 in) pipe – contact factory for additional pipe diameters</li></ul>

– Water tank capacity 1514 L (400 gal)<br>– 204 m³/min (7,200 cfm) dry dust collector<br>– Self-cleaning filters, with auto-eject dust chute

Static dust curtains, four sides boxed in (standard)

– Water tanks total capacity 3785 L (1,000 gal) maximum<br>– Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather)<br>– Secondary tank above deck – 2271 L (600 gal) capacity deck

Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications)

– Water tank capacity 1514 L (400 gal)

Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector)

Ether starting aid; ether bottle supplied locally

Scheduled oil sampling (S∙O∙SSM) ports

Dual starter motors

Common air intake filters provide +500 hour service interval in normal operating conditions

Cab perimeter walkway available with either choice

Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down

Fixed access ladder to the cab area

Cab perimeter walkway available with either choice

Hydraulically operated viewing hatch in drill deck with spotlight (option)

Sturdy guardrails, toe guards, self closing gates

Four (4) lift lugs, for use with cables or chains

Drill pipe thread greaser with remote fill tank or disposable grease bucket (option)

Bit storage box in-deck with hinged cover (option)

Heavy duty tow hooks (front end)

Walkway around cab to drill deck (option)

Slip resistant surface

Fuel tank capacity 1609 L (425 gal)

Stationary rear deck; for vertical and angle drilling

Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option)

DTH hammer storage on drill deck with high pressure configuration (option)

Fuel capacity expansion for additional +1609 L (425 gal)

Bolt-on platform for cold weather generator or fire suppression bottles (option)

Four leveling jacks to provide leveling on a 7° bench (any orientation)

Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life

Three egress points on deck areas in addition to main access

235 mm (9.25 in)

178-219 mm (7.0-8.625 in)

Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)

Two (2) primary pumps – 210 cc (piston, with proportional electronic controls)

Scheduled Oil Sampling (S∙O∙S) ports

Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls)

One (1) auxiliary circuit pump – 110 cc (piston, load sensing)

Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling

Pipe catcher; manual or optional hydraulically actuated

Feed system accommodates multiple pipe diameters

Hydraulic, indexing pipe carousels accept various pipe diameters

Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb)

Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only)

Mast access ladder and grating (option)

Pulldown/hoist system is a single cylinder

Angle drilling 0-30°; in 5° increments

13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel

Drill pipe positioner

Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option)

Sliding deck wrench assembly

Auto tensioning of pull down and hoist cables

Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters

Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH

Mast lanyard mounting provisions (option)

Included with either mast

Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket

One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket

One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket

One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket

Delayed engine shut down

Dust curtain lifting system – auto hydraulic raise front and rear (option)

Filter indicators for hydraulic, compressor and engine

Cab environment controls (AC, filter, heat, fan speeds)

Drill depth meter

ECM controlled proportional fan speed control system

Data logging of machine health with warnings, and fault code records; export capability

Drill performance and display system

Jack pressure sensors in the display

Tram interlock, pipe in hole

Rotation torque control

Dust suppression control

Tram interlock, mast up and locked or down and parked

All electric controls for drilling, tramming, leveling plus auxiliary functions

Prewired for Terrain and autonomous operation

Mast lock indicator

Electronic compressor control

Virtual rotary head travel stops and interlocks

Cabin pressure manometer with indicator (option)

Pipe positioner engaged/disengaged indicator

Tram interlock, jacks retracted

Tram interlock, machine stability limits

Rotary head rpm gauge – (digital display in screen)

Trainer’s seat that folds away and has retractable seat belt (optional)

– Fabric seat<br>– Single pane window glass<br>– Windshield wiper for driller window<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat

Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave

– Mounted on the front and left sides to provide 360° view from operator's seat<br>– Camera on the mast to view pipe carousel/top drive operation

Cab roof access ladder (option)

– LED interior lights; separate reading light, and backlit joysticks and keypads<br>– Zone controls for area lights and spot lighting for night drilling<br>– Flood lights for the drill perimeter<br>– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways<br>– Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens<br>– Premium lighting is LED, 4,200 lumens flood light on perimeter (option)<br>– Mast clearance lights, cab mounted strobe, front mounted tram beacon (option)

Literature holder

Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port

Drill performance touchscreen display

– Floor vents in the foot rest area<br>– Roof-mounted air conditioner/heating/pressurizing unit<br>– Filter access from deck, does not require roof access, and has approximately 500 hour service interval<br>– Defogging HVAC vents on driller window

Two swing-out hinged doors with windows and Cat keyed locks

Cab perimeter walkway available for both cab sizes

Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station

Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise

Radio-ready for communication and entertainment radio

– Leather seat with heat and ventilation<br>– Dual pane window glass<br>– Front window guard<br>– Additional in-cab storage box<br>– Additional windshield wipers on front and rear windows<br>– Window shades (option)<br>– Foldaway trainer’s seat (option)<br>– Removable floor mat

Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)

Additional display screen for cc cameras; color, high-definition 254 mm (10 in)

Power convertor 24V to 12V

Variable speed control

Up to 39 009 kg (86,000 lb)

Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque

Virtual rotary head travel stops and interlocks

Spindle with 168 mm (6.625 in) API regular thread and splined collar

Rotary torque control

In-deck mounted battery box

Hinged protective guard for full front drill window

Self-closing, gates secure egress ladder locations

Alloy drill deck covers, with storage provision

Three egress points on deck areas in addition to main access

Air hose retention devices

Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left

Guards for exhaust pipes and turbo lines

Electric horn activated by push button in the cab

Approach angle of 14 degrees facilitates loading and unloading on a lowboy

Mast access ladder with mast grating (option)

Tram alarm is automatic and audible

Ground level keyed battery disconnect/starter lockout with remote jump start terminals

Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water

Standard – Fast Fill for fuel and water; Automatic Lubrication System

Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose

– 114 mm (4.5 in) API reg thread<br>– 140 mm (5.5 in) API reg thread<br>– 168 mm (6.625 in) for top sub/shock sub API thread<br>– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread<br>– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread

Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter

Up to 42 149 kg (Up to 92,922 lb)

229-311 mm (9-12.25 in)

Cat® C32B

Shock sub and top sub adapter

Cross over hammer adapter

Deck wrench, sliding

Two piece bushing

Pipe positioner inserts

Pipe wiper seal

Top Sub, or Shock sub and cross over adapter (option)

Deck wrench, sliding

Bit sub

Roller deck bushing

Pipe wiper seal

Pipe positioner inserts

Level two

Three (3)

Cat® 349E EL Excavator type

Fourteen (14)

75 800/97 000 kg (167,110/213,848 lb)

75 500/97 500 kg (166,449/214,950 lb)