THIS IS MY SELECT

ATS MX Contactor

MX350 Controller

Voltage Unbalance on Dropout for Source 1 and Source 2

93.0 hp

5 to 20% of nominal

Delay NeutralTransition Time Delays (DT,DW)

93.0 hp

0-10 minutes

Control Power

93.0 hp

120 VAC

THIS IS MY SELECT

backhoe loader

MX350 Controller

Voltage Unbalance on Dropout for Source 1 and Source 2

93.0 hp

5 to 20% of nominal

Delay NeutralTransition Time Delays (DT,DW)

93.0 hp

0-10 minutes

Control Power

93.0 hp

120 VAC

Specifications

The MX350 controller is specifically designed for low voltage Automatic Transfer Switch (ATS) applications. The flexible control and communications options are ideal for any application. Integrated push buttons, graphical controls and LED indicators reduce external components and wiring in addition to providing local control and access to system information. Multiple communication protocols allow simple integration into monitoring and control systems.

      • Voltage Unbalance on Dropout for Source 1 and Source 2

        93.0 in

        93.0 mm

        5 to 20% of nominal

        Delay NeutralTransition Time Delays (DT,DW)

        93.0 in

        93.0 mm

        0-10 minutes

        Control Power

        93.0 in

        93.0 mm

        120 VAC

        Undervoltage Dropout for Source 1 and Source 2

        93.0 in

        93.0 mm

        75-99% of nominal

        Undervoltage Restore for Source 1 and Source 2

        93.0 in

        93.0 mm

        85-100% of nominal

        Overfrequency Dropout for Source 1 and Source 2

        93.0 in

        93.0 mm

        50.1 - 63 Hz

        Source Sensing

        93.0 in

        93.0 mm

        120 - 690 VAC +/- 1% of nominal voltage (+/- .05 Hz, +/-.5 A)

        Delay for Engine Cool Down (U)

        93.0 in

        93.0 mm

        0-60 minutes

        Underfrequency Restore for Source 1 and Source 2

        93.0 in

        93.0 mm

        45 - 59.5 Hz

        Load Control Relay Contacts (2)

        93.0 in

        93.0 mm

        0-259 minutes

        Overvoltage Dropout for Source 1 and Source 2

        93.0 in

        93.0 mm

        105 - 110% of nominal

        Voltage Unbalance for Restore for Source 1 and Source 2

        93.0 in

        93.0 mm

        4 to 19% of nominal

        Storage Temperature

        93.0 in

        93.0 mm

        (-40˚C - 90˚C )

        Underfrequency Dropout for Source 1 and Source 2

        93.0 in

        93.0 mm

        45 - 59.9 Hz

        Overfrequency Restore for Source 1 and Source 2

        93.0 in

        93.0 mm

        50 - 62.9 Hz

        Delay Transfer to Nonpreferred Source (W)

        93.0 in

        93.0 mm

        0-5 minutes

        Operating Temperature Ambient

        93.0 in

        93.0 mm

        (-20˚C to 50˚C)

        Communications Interface - Optional

        93.0 in

        93.0 mm

        Serial RS-485 upt to 115.2 Kbps or TCP/IP (10/100 base-T)

        Overvoltage Restore for Source 1 and Source 2

        93.0 in

        93.0 mm

        103 - 108% of nominal

        Load Control Relay Contacts (1)

        93.0 in

        93.0 mm

        rated for 10A @ 24VDC or 120VAC

      • Rating Range

        93.0 in

        93.0 mm

        Switch Dependent

        Transfer Type

        93.0 in

        93.0 mm

        Application Dependent

        Switch Type

        93.0 in

        93.0 mm

        Application Dependent

      • Status LEDS for:

        • Transfer Inhibit

        • Active Alarms

        • Source 1 and 2 Availablity

        • Source 1 and 2 Connected

        • Time Delay Active

      • Graphical Display:

        • Color graphical display with USB Calibration/programming port and Embedded Help

        • Displays 256 time-tagged events with 1 ms resolution

        • Monitors over/under frequency, voltage conditions, frequency imbalance, and phase rotation

        • Provided detailed outage,test,and diagnostic reports

      • Ranges of Controls / Metering:

        • Programmable generator exerciser

        • Synchroscope

        • Contacts for Source 1 and Source 2 position indication as well as remote load test signals, and engine start delay

        • Source 1 and Source 2 In-phase monitor

        • Neutral, Engine Start, and Engine stop time delay timers

      • Testing and Certification

        • Conforms to EN 60947-1, EN 60947-6-1, EN 60255-26 (EN 50263), EN 5502 / CISPR22 / EN 61000-6-2 / EN 61000-6-4

        • Tested in accordance with: IEC 60068-2-30 IEC 60068-2-1 IEC 60068-2-2 IEC 60255-22-1 IEC 60255-22-2 IEC 60255-22-3 IEC 60255-22-4 IEC 60255-22-5 IEC 60255-22-6 IEC 60255-25 IEC 60529; IP54 (front),IP20(back) IEC 61000-4-11

        • Quality System: Manufactured under an ISO 9001 Registered Program

      • Option Package A:

        • Four (4) programmable inputs and four (4) outputs assignable to additional ATS features

        • Expanded diagnostics, high-speed 256 event capture, 365 days

        • Monitoring Software (local or remote), USB interface for uploading and downloading setup parameters

        • Full function ATS control with full sensing and control capabilities

        • Full complement of programmable ATS control switches AUTO / MAN, Preferred Source selector,Commit / No Commit Xfer, Transition Mode Select for Closed Transition switch models)

      • Option Package B:

        • Waveform capture, ten (10) channels, up to 256 cycles each sixteen (16) samples / sec.

        • Ten (10) customer programmable digital and ten (10)analog alarms.

        • Includes Option Package A features, plus

        • Auto Load Shed with voltage, frequency and kW triggers.

        • Twenty (20) channel data logger, customer configurable sample period from one (1) cycle to sixty (60) minutes.

      • Option Package C:

        • Includes Option B features, plus

        • Four (4) additional inputs and outputs (totaling eight (8) in & eight (8) out)

      • Option Package D:

        • Customized user control logic

        • Includes Option Package C features, plus

        • Four (4) additional inputs and outputs (totaling twelve (12) in & twelve (12) out)

      • Option Package M:

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN