THIS IS MY SELECT

Commercial Propulsion Engines

C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

Power Range

280 bhp - 425 bhp (209 bkW - 317 bkW)

Speed Range

2300 - 2700 rpm

Emissions

U.S. EPA Tier 3, IMO II, RCD II, China II

SPECIFICATIONS

C7.1 Marine Propulsion Engine (U.S. EPA Tier 3 / IMO II)

    Dimensions & Weights

    Dry Weight

    1,676 lb

    Height

    34.5 in

    Length

    43.1 in

    Width

    31.4 in

    Engine Specifications

    Speed Range

    2300 - 2700 rpm

    Emissions

    U.S. EPA Tier 3, IMO II, RCD II, China II

    Configuration

    In-line 6, 4-stroke-cycle diesel

    Displacement

    428 in³

    Aspiration

    Turbocharged-aftercooled

    Governor

    Electronic (A5E2 V2 ECM)

    Flywheel Housing

    SAE No. 03

    Bore

    4.13 in

    Stroke

    5.31 in

    Refill Capacity

    20 L (5.3 gal)

    Oil Change Interval

    500 hrs

    Rotation

    Counterclockwise from the flywheel end

    Cooling

    Heat exchange or keel cooled

    Power Rating

    Power Range

    280 bhp - 425 bhp (209 bkW - 317 bkW)

    • General
      • Marine Classification Society (MCS) Approval
      • Water-cooled turbocharger and exhaust manifold
      • Closed crankcase ventilation system
      • Integral engine oil cooler
      • Self-tensioning multi-vee alternator drive belt
    • Fuel System
      • Common rail fuel system
      • Starter motors - 12V or 24V
      • Fuel cooler
      • Electric fuel priming pump
    • Starting System
      • Corrosion-resistant sea water aftercooler
    • Mounting System
      • Vibration damper and guard
      • Front and rear engine mounting brackets
    • Cooling System
      • Gear-driven seawater pump (rubber impeller)
      • Fin and tube-type jacket water heat exchanger

    • Fuel System
      • SOLAS double wall high-pressure fuel lines
    • General
      • Engine-mounted secondary alternator - 24V 55 amp or 12V 100 amp
      • Analogue gauge displays
      • Glow plugs
      • Mechanical throttle converter for repower
    • Cooling System
      • Transmission gear oil cooler (engine mounted)
      • Jacket water heater
      • Cabin heater (calorifier) connections
    • Exhaust System
      • Various 5" and 6" water cooled exhaust elbow configurations
    • Lube System
      • Right-hand and high-level left-hand oil dipsticks

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN