THIS IS MY SELECT

Small Wheel Loaders

938M Waste Handler Small Wheel Loader

Maximum Gross Power

188 HP

Operating Weight

41,794 lb

Bucket Capacities

93.0 hp

3.0-5.0 m3 (3.9-6.5 yd3)

THIS IS MY SELECT

backhoe loader

938M Waste Handler Small Wheel Loader

Maximum Gross Power

188 HP

Operating Weight

41,794 lb

Bucket Capacities

93.0 hp

3.0-5.0 m3 (3.9-6.5 yd3)

Specifications

The Cat® 938M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

      • Maximum Gross Power

        188 HP

        140 kW

        Bore

        4 in

        105 mm

        Stroke

        5 in

        135 mm

        Displacement

        427 in³

        7.01 l

        Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)

        627 ft·lbf

        850 N·m

        Note (3)

        93.0 in

        93.0 mm

        No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

        Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)

        188 HP

        140 kW

        Emissions

        93.0 in

        93.0 mm

        The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.

        Note (1)

        93.0 in

        93.0 mm

        *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

        Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)

        650 ft·lbf

        882 N·m

        Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)

        628 ft·lbf

        852 N·m

        Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)

        186 HP

        137 kW

        Engine Power - ISO 14396

        188 HP

        140 kW

        Engine Power - ISO 14396 - Metric

        190 HP

        140 kW

        Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)

        190 HP

        140 kW

        Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)

        173 HP

        129 kW

        Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

        183 HP

        137 kW

        Net Power (Standard Power Mode: Range 1-3*)

        1,600 r/min

        1,600 r/min

        Net Power (Performance Power Mode: Range 1-4)

        1,800 r/min

        1,800 r/min

        Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)

        176 HP

        129 kW

        Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

        170 HP

        127 kW

        Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

        170 HP

        127 kW

        Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)

        172 HP

        127 kW

        Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)

        642 ft·lbf

        870 N·m

        Engine Model

        93.0 in

        93.0 mm

        Cat® C7.1

        Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)

        1,800 r/min

        1,800 r/min

        Note (2)

        93.0 in

        93.0 mm

        Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

        Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)

        649 ft·lbf

        880 N·m

        Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)

        664 ft·lbf

        900 N·m

        Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)

        1,600 r/min

        1,600 r/min

        Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

        184 HP

        137 kW

      • Rear Axle - Oscillation Angle by Tire Size - 23.5 R25

        93.0 in

        93.0 mm

        ± 7 degrees

        Note (2)

        93.0 in

        93.0 mm

        Offset rims available to meet European roading requirements.

        Front Axle

        93.0 in

        93.0 mm

        Fixed

        Brakes - Parking

        93.0 in

        93.0 mm

        Spring applied hydraulically released

        Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65

        93.0 in

        93.0 mm

        ± 10.5 degrees

        Brakes - Service

        93.0 in

        93.0 mm

        Inboard wet disc

        Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder

        93.0 in

        93.0 mm

        ± 7 degrees

        Rear Axle - Traction Aid - Optional

        93.0 in

        93.0 mm

        Limited slip differential

        Front Axle - Traction Aid

        93.0 in

        93.0 mm

        Locking differential

        Note (1)

        93.0 in

        93.0 mm

        Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

        Rear Axle

        93.0 in

        93.0 mm

        Oscillating

        Note (3)

        93.0 in

        93.0 mm

        Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M.

      • Hydraulic Tank

        23.8 gal (US)

        90 l

        Diesel Exhaust Fluid (DEF) Tank

        5 gal (US)

        19 l

        Cooling System

        8.5 gal (US)

        32 l

        Hydraulic System - Including Tank

        44.9 gal (US)

        170 l

        Engine Crankcase

        5.3 gal (US)

        20 l

        Transmission - Gear Box

        2.9 gal (US)

        11 l

        Axles - Front

        9.2 gal (US)

        35 l

        Fuel Tank

        51.5 gal (US)

        195 l

        Axles - Rear

        9.2 gal (US)

        35 l

      • Bucket Capacities

        93.0 in

        93.0 mm

        3.0-5.0 m3 (3.9-6.5 yd3)

      • Note (2)

        93.0 in

        93.0 mm

        ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

        Full Turn Tip Load (1)

        93.0 in

        93.0 mm

        9795 kg (21,594 lb)**

        Note (1)

        93.0 in

        93.0 mm

        **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

        Full Turn Tip Load (2)

        93.0 in

        93.0 mm

        10 741 kg (23,679 lb)^

      • Operating Weight

        41,794 lb

        18,958 kg

        Note (2)

        93.0 in

        93.0 mm

        ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

        Operating Weight (1)

        93.0 in

        93.0 mm

        17 258 kg (38,046 lb)**

        Operating Weight (2)

        93.0 in

        93.0 mm

        18 958 kg (41,794 lb)^

        Note (1)

        93.0 in

        93.0 mm

        **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

      • ROPS

        93.0 in

        93.0 mm

        ISO 3471:2008

        FOPS

        93.0 in

        93.0 mm

        ISO 3449:2005 LEVEL II

        Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*

        101 dB(A)

        101 dB(A)

        Note (1)

        93.0 in

        93.0 mm

        * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed. – The Blue Angel environmental label is an optional attachment for Europe only.

        Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*

        68 dB(A)

        68 dB(A)

      • Air Conditioning

        93.0 in

        93.0 mm

        The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

      • Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

        4,351 psi

        30,000 kPa

        Maximum Flow - Implement Pump - 3rd Function Maximum Flow*

        50 gal/min

        190 l/min

        Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)

        93.0 in

        93.0 mm

        2.7/2.7 seconds

        Maximum Flow - Implement Pump

        50 gal/min

        190 l/min

        Tilt Cylinder: Standard Lift Linkage - Stroke

        21.9 in

        555 mm

        Lift Cylinder: Standard Lift Linkage - Bore Diameter

        4.7 in

        120 mm

        Tilt Cylinder: Standard Lift Linkage - Bore Diameter

        5.9 in

        150 mm

        Lift Cylinder: Standard Lift Linkage - Rod Diameter

        2.6 in

        65 mm

        Tilt Cylinder: Standard Lift Linkage - Rod Diameter

        3.5 in

        90 mm

        Maximum Flow - Implement Pump - 4th Function Maximum Flow*

        42 gal/min

        160 l/min

        Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)

        93.0 in

        93.0 mm

        1.5/1.7 seconds

        Relief Pressure - Tilt Cylinder

        4,351 psi

        30,000 kPa

        Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

        4,061 psi

        28,000 kPa

        Note (1)

        93.0 in

        93.0 mm

        Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

        Lift Cylinder: Standard Lift Linkage - Stroke

        31.1 in

        789 mm

        Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)

        93.0 in

        93.0 mm

        5.5/6.2 seconds

        Note (2)

        93.0 in

        93.0 mm

        Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

        Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time

        93.0 in

        93.0 mm

        9.7/10.6 seconds

        Maximum Working Pressure - Implement Pump

        4,061 psi

        28,000 kPa

        Note (3)

        93.0 in

        93.0 mm

        * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.

      • Steering Cylinder, Double Acting - Rod Diameter

        2 in

        50 mm

        Steering Cylinder, Double Acting - Bore Diameter

        3.1 in

        80 mm

        Note (1)

        93.0 in

        93.0 mm

        Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

        Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited

        3.1 s

        3.1 s

        Steering Cylinder, Double Acting - Stroke

        15.7 in

        399 mm

        Maximum Flow - Steering Pump

        34 gal/min

        130 l/min

        Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed

        2.3 s

        2.3 s

        Maximum Working Pressure - Steering Pump

        3,500 psi

        24,130 kPa

        Maximum Steering Torque - 40° (Full Turn)

        31,398 ft·lbf

        42,570 N·m

        Maximum Steering Torque - 0° (Straight Machine)

        42,506 ft·lbf

        57,630 N·m

        Note (2)

        93.0 in

        93.0 mm

        Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

      • Forward and Reverse - Range 4

        25 mile/h

        40 km/h

        Note

        93.0 in

        93.0 mm

        *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

        Forward and Reverse - Range 3

        17 mile/h

        27 km/h

        Forward and Reverse - Range 1*

        93.0 in

        93.0 mm

        1-13 km/h (0.6-8 mph)

        Forward and Reverse - Range 2

        8 mile/h

        13 km/h

      • POWER TRAIN

        • Axle Duo-Cone™ seal guards

        • Auto idle shut down feature

        • Cat C7.1 engine – Power modes (Standard and Performance) – Power by range (High Power in Range 4) – Turbocharged and aftercooled – Diesel particulate filter (Fit for Life)

        • Coded start (requires secondary display)

        • Differential lock in front axle

        • Enclosed wet disc full hydraulic brakes

        • Hydraulically driven demand cooling fan

        • Hydrostatic transmission with electronic control – Operator modes (Default, TC, Hystat, and Ice) – Directional Shift Aggressiveness (fast, medium, slow) – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed

        • Parking brake, electric

        • Single plane cooling package wide six fins per inch density

        • Oil sampling ports

        • Throttle lock and max speed limiter

      • HYDRAULICS

        • Automatic lift lower and tilt kickouts, adjustable in-cab

        • Bucket and fork modes, adjustable in-cab

        • Cylinder damping at kickout and mechanical end stops

        • Fine mode control (fast, medium, slow)

        • Hydraulic response setting (fast, medium, slow)

        • Load sensing hydraulics and steering

        • Seat-mounted hydraulic joystick controls

      • ELECTRICAL

        • Alternator, 115 amp, heavy duty

        • Batteries, 1,000 CCA (2) 24V system, disconnect switch

        • Back-up alarm

        • Emergency shutdown switch

        • Halogen work and roading lights, LED rear tail lights

        • Product Link PRO with three year subscription

        • Remote jump start post

        • Resettable main and critical function breakers

      • OPERATOR ENVIRONMENT

        • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator

        • Automatic temperature control

        • Cab, pressurized

        • Camera, rearview

        • External heated mirrors with lower parabolic

        • Ground level cab door release

        • Hydraulic control lockout

        • Mirror, single

        • Lunch box storage

        • Radio ready speakers

        • Rear window defrost, electric

        • Column mounted multi function control – lights, wipers, turn signal

        • Tilt and telescopic steering wheel

        • Tinted front glass

        • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal

        • Suspension seat, fabric

      • OTHER STANDARD EQUIPMENT

        • Large-access enclosure doors with adjustable close/open force

        • Cat optimized Z-bar linkage with parallel lift

        • Recovery hitch, with pin

        • Remote mounted lubrication points

        • Lockable compartments and enclosures

      WHY CHOOSE EMPIRE

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance