THIS IS MY SELECT

926 Small Wheel Loader

Rated Gross Power - SAE J1995

170 hp

Operating Weight

27,972 lb

Bucket Capacities

1.9-5.0 m3 (2.5-6.5 yd3)

Browse Rental Machines Search Used Machines

REQUEST A QUOTE

Download Product Brochure

Document 1

View Current Deals

SPECIFICATIONS

Cat® wheel loaders set the standard for productivity, fuel efficiency, operator comfort and low operating costs. The Cat 926 Small Wheel Loader features a high torque C7.1 engine that works in conjunction with an intelligent hydrostatic power train to deliver exceptional fuel efficiency. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, designed to manage itself so you can concentrate on your work. Extended service intervals to 1000 hours reduce fluid and filter use by up to 45% (compared to previous M Series models) while keeping operating cost low.

FULL SPECIFICATIONS

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).

Axles

Front

Fixed; Locking differential (standard)

Rear

Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)

Buckets

Bucket Capacities

1.9-5.0 m3 (2.5-6.5 yd3)

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 LEVEL II

Dimensions with Bucket - High Lift

Height - Ground to Cab**

10.92 ft

Height - Ground to Beacon**

12.17 ft

Height - Ground to Axle Center**

2.25 ft

Height - Ground Clearance**

1.33 ft

Length - Overall*

26.5 ft

Length - Rear Axle to Bumper

6.42 ft

Length - Hitch to Front Axle

4.92 ft

Length - Wheel Base

9.83 ft

Clearance - Bucket at 45°*

11.08 ft

Clearance - Load over Height**

11.67 ft

Clearance - Level Bucket**

13.33 ft

Height - Bucket Pin**

14.42 ft

Height - Overall**

18.25 ft

Reach - Bucket at 45°*

4.17 ft

Carry Height - Bucket Pin

1.92 ft

Dig Depth**

5.3 in

Width - Bucket

8.33 ft

Width - Tread Center

6.33 ft

Turning Radius - Over Bucket

20.42 ft

Width - Over Tires

8.33 ft

Turning Radius - Outside of Tires

17.75 ft

Turning Radius - Inside of Tires

9.33 ft

Rack Angle at Full Lift

51 °

Dump Angle at Full Lift

49 °

Rack Angle at Carry

47 °

Departure Angle

33 °

Articulation Angle

40 °

Operating Weight

28,787 lb

Note (1)

*Vary with bucket.

Note (2)

**Vary with tire.

Note (3)

Dimensions listed are for a machine configured with 1.9 m³ (2.5 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.

Dimensions with Bucket - Standard Lift

Height - Ground to Cab**

10.92 ft

Height - Ground to Beacon**

12.17 ft

Height - Ground to Axle Center**

2.25 ft

Height - Ground Clearance**

1.33 ft

Length - Overall*

24.25 ft

Length - Rear Axle to Bumper

6.42 ft

Length - Hitch to Front Axle

4.92 ft

Length - Wheel Base

9.83 ft

Clearance - Bucket at 45°*

9.42 ft

Clearance - Load over Height**

11 ft

Clearance - Level Bucket**

11.75 ft

Height - Bucket Pin**

12.83 ft

Height - Overall**

16.67 ft

Reach - Bucket at 45°*

3.08 ft

Carry Height - Bucket Pin

1.25 ft

Dig Depth**

3.9 in

Width - Bucket

8.33 ft

Width - Tread Center

6.33 ft

Turning Radius - Over Bucket

19.33 ft

Width - Over Tires

8.33 ft

Turning Radius - Outside of Tires

17.75 ft

Turning Radius - Inside of Tires

9.33 ft

Rack Angle at Full Lift

53 °

Dump Angle at Full Lift

50 °

Rack Angle at Carry

41 °

Departure Angle

33 °

Articulation Angle

40 °

Operating Weight

27,972 lb

Note (1)

*Vary with bucket.

Note (2)

**Vary with tire.

Note (3)

Engine

Rated Gross Power - SAE J1995

170 hp

Engine Model

Cat C7.1*

Performance Mode

Automatic

Rated Gross Power - Rated Engine Speed

1,800 r/min

Rated Gross Power - SAE J1995 (DIN)

172 mhp

Rated Engine Power - ISO 14396

168 hp

Rated Engine Power - ISO 14396 (DIN)

170 mhp

Rated Net Power - SAE J1349 at Minimum Fan Speed

165 hp

Rated Net Power - ISO 9249 at Minimum Fan Speed

165 hp

Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed

167 mhp

Maximum Gross Torque - Engine Speed

1,400 r/min

Maximum Gross Torque - SAE J1995

608 ft·lbf

Maximum Gross Torque - ISO 14396

601 ft·lbf

Maximum Net Torque - SAE J1349

593 ft·lbf

Maximum Net Torque - ISO 9249

595 ft·lbf

Displacement

427 in³

Bore

4 in

Stroke

5 in

Note

*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.

Note (1)

Advertised power is tested per the specified standard in effect at the time of manufacture

Note (2)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Note (3)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Loader Hydraulic System

Maximum Flow - Implement Pump

40 gpm

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*

40 gpm

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

40 gpm

Maximum Working Pressure - Implement Pump

3,771 psi

Relief Pressure - Tilt Cylinder

4,061 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

3,771 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

4,061 psi

Lift Cylinder: Standard Lift Linkage - Bore Diameter

1.3 in

Lift Cylinder: Standard Lift Linkage - Rod Diameter

2.4 in

Lift Cylinder: Standard Lift Linkage - Stroke

28.7 in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter

5.5 in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter

3 in

Tilt Cylinder: Standard Lift Linkage - Stroke

20.3 in

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

5.5 s

Hydraulic Cycle Time - Dump (at Maximum Lift Height)

1.5 s

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.6 s

Hydraulic Cycle Time - Total Cycle Time

9.6 s

Note

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Service Refill Capacities

Fuel Tank

51.5 gal (US)

Cooling System

7.9 gal (US)

Engine Crankcase

5.3 gal (US)

Transmission - Gear Box

2.2 gal (US)

Front Axles

6.9 gal (US)

Rear Axles

6.6 gal (US)

Hydraulic System - Including Tank

42.3 gal (US)

Hydraulic Tank

23.8 gal (US)

Diesel Exhaust Fluid (DEF) Tank

5 gal (US)

Note

DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.

Sound

Operator Sound Pressure (ISO 6396:2008)

68 dB(A)

Average Exterior Sound Pressure (ISO 6395:2008)

101 dB(A)

Note (1)

European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.

Steering

Steering Cylinder - Bore Diameter

2.8 in

Steering Cylinder - Rod Diameter

1.6 in

Steering Cylinder - Stroke

17.2 in

Maximum Flow - Steering Pump

34 gpm

Maximum Working Pressure - Steering Pump

3,500 psi

Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited

2.8 s

Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed

2.4 s

Sustainability

Recyclability

95%

Tires

Standard Size

20.5 R25, radial (L-3)

Other Choices Include

20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Transmission

Forward and Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse - Range 2

8 mile/h

Forward and Reverse - Range 3

17 mile/h

Forward and Reverse - Range 4

25 mile/h

Note

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Weights

Operating Weight

27,972 lb

Operating Weight - High Lift

28,767 lb

STANDARD EQUIPMENT

NOTE: Not all features are available in all regions.
OPERATOR ENVIRONMENT
- 75 mm (3 in) retractable seatbelt
- Automatic temperature control
- Cab, enclosed ROPS/FOPS pressurized and sound suppressed
- Push to Start
- 8 Inch Touch Screen
- Jog Dial with screen control
- Programmable Joystick
- Cup holders
- External mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Interior cab lighting, door
- Lunch box storage
- Operator Not Present system
- Radio ready speakers
- Rear window defrost, electric
- Seat mounted electronic implement controls, adjustable
- Sliding glass on side window
- Column mounted multi function control lights, wipers, turn signal
- Suspension seat, fabric
- Tilt steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front
- Wet arm wiper washer, rear
- Mounting Provision
- Digital hour meter, odometer and tachometer
- Digital ground speedometer and direction indicator
- Engine coolant temperature gauge
- Fuel and diesel exhaust fluid levels
- Hydraulic oil temperature gauge
POWER TRAIN
- Cat C7.1 engine
- Auto idle shut down feature
- Auto Engine RPM
- Tier 4 Final/EU Stage V compliant
- Turbocharged and aftercooled
- Filtered crankcase breather
- Diesel particulate filter
- Selective catalyst reduction
- Dry type air cleaner
- Coolant protection to –34 °C (–29 °F)
- Fuel priming pump, automatic
- Fuel water separator
- Differential lock in front axle
- Axle seal guards
- Enclosed wet disc full hydraulic brakes
- Parking brake, electric
- Lubed for life driveshafts
- Hydrostatic transmission with electronic control
- Operator modes (TC, Hystat,
- Single Pedal and Ice)
- Directional shift aggressiveness (fast, medium, slow)
- Auto Wheel Torque control, adjust wheel torque
- Creeper control, adjust ground speed
- Single plane cooling package, wide 6 fins per inch density
- Hydraulically driven demand cooling fan
- Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission
HYDRAULICS
- Automatic lift and bucket kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Hydraulic diagnostic connectors and
- S·O·S ports
- Hydraulic sight gauge, visible
- Load sensing hydraulics and steering
- Seat mounted hydraulic joystick controls
- Cat Payload 250 hours of Demo
ELECTRICAL
- Alternator, 115-amp, heavy duty
- 12V power supply in cab (2)
- Batteries, 1,000 CCA (2) 24-volt system, disconnect switch
- Back up alarm
- Emergency shutdown switch
- LED rear stop and turn lights
- Heavy duty gear reduction starter
- Product Link™ Elite
- Remote jump start post
- Resettable main and critical function breakers
- Roading lights front and rear
OTHER
- Large-access enclosure doors with adjustable close/open force
- Parallel lift loader linkage
- Recovery hitch with pin
- Remote mounted lubrication points
- Lockable compartments
- 1000-hour Service Intervals (after initial 500)

OPTIONAL EQUIPMENT

NOTE: Not all features are available in all regions.
OPERATOR ENVIRONMENT
- Joystick steering – 25 mph (40 kph) capable
- Radio packages
- Telescoping Steering Column
- Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
- Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Rear Object Detection
- Multi View Camera
- Front View Camera, roof mounted
- Heated external Mirrors (2)
- Electrically adjustable and heated external mirrors (2)
- Internal Mirrors (2)
- Sunscreen, front and rear
- Windshield Washing Platform
- Powered precleaned for cab air
- Cab guarding
POWER TRAIN
- Differential, limited slip, rear
- Powertrain Guarding
- Tire Pressure Monitoring (TPM)
- Range of Tire Options
- Fenders (extended cover and full coverage)
HYDRAULICS
- Auxiliary flow, third and fourth function
- Connect Under Pressure Disconnects
- Ride Control System, adjustable via display
- Autolube, integrated in display
- Biodegradable Oil
- Debris packages (low, medium, high)
ELECTRICAL
- Cold start package
- Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Beacon light, strobe
- Light Guarding
OTHER OPTIONAL EQUIPMENT
- Linkage, high lift
- Coupler, (Fusion and ISO 23727:2009)
- Aggregate Counterweight
- Cat Payload Printer
- Cylinder Guarding
- Range of Work Tool Attachments