Cat® Construction Fork Carriages for Small Wheel Loaders are wider than pallet fork carriages and are designed for heavy duty applications. Fork tines can be configured to allow tines to either swing or stay in a fixed position.
Detailed Equipment Specifications
Height
43.1 in
1,095 mm
Width
84 in
2,134 mm
Tine Spacing Range - Outside Width
395-2034 mm (15.5-80.1 in)
Weight
1,148.6 lb
521 kg
Length
14.4 in
366 mm
Interface Type
Fusion™ Coupler
Tine Spacing
270-1924 mm (10.6-76 in) centerline to centerline
Heavy Duty Design and High Backs
This heavy duty carriage was specially designed to deliver performance at construction sites, moving palletized and large materials around. The high backs and good visibility through the frame make it happen.
Swinging Forks Capability
In some operations, swinging forks helps to pick materials out of the ground. This carriage offers this option by just removing the lower bar and placing at the special storage located at the bottom of the carriage.
Adjustable Fork Positions
Adjust the fork position a total of 855 mm (33.7 in) from one side to the other with increments of 55 mm (2.2 in) and lock them to prevent non-expected movements.
Positioning Lever
Use the included red lever located at the right rear storage area to move your forks with safety and convenience.
Empire Southwest has acquired Cashman Equipment and is now your local Cat dealer for the Arizona, Nevada, and parts of Eastern California. Take a look at our new store fronts and discover all the solutions Empire has to offer. To learn more about this transition view our press release.
