THIS IS MY SELECT
914 Compact Wheel Loader
Maximum Gross Power
110 HP
82 kW
Operating Weight
19,103 lb
8,668 kg
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
SPECIFICATIONS
The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.
Detailed Equipment Specifications
Axles
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Front
Fixed; Locking differential (standard)
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Engine
Maximum Gross Power
110 HP
82 kW
Rated Net Power - Rated Engine Speed
2,200 r/min
2,200 r/min
Maximum Gross Power - Rated Engine Speed
1,800 r/min
1,800 r/min
Rated Net Power - SAE J1349
99 HP
74 kW
Maximum Gross Power - ISO 14396 (metric)
112 HP
112 HP
Rated Net Power - ISO 9249
98 HP
73 kW
Maximum Gross Torque - SAE J1995
335 ft·lbf
454 N·m
Maximum Gross Torque - ISO 14396
332 ft·lbf
450 N·m
Maximum Net Torque - SAE J1349
329 ft·lbf
446 N·m
Maximum Net Torque - ISO 9249
327 ft·lbf
443 N·m
Displacement
220 in³
3.6 l
Bore
3.85 in
98 mm
Stroke
4.72 in
120 mm
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
110 HP
82 kW
Loader Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
12.5 s
12.5 s
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3,046 psi
21,000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
90 l/min
Maximum Flow - Implement Pump
39 gal/min
148 l/min
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3,046 psi
21,000 kPa
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
90 l/min
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
1.4 s
Relief Pressure - Tilt Cylinder
4,931 psi
34,000 kPa
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
Maximum Working Pressure - Implement Pump
4,061 psi
28,000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min
120 l/min
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
43.6 gal (US)
165 l
Axles - Front Center Differential
2 gal (US)
7.5 l
Hydraulic Tank
14.5 gal (US)
55 l
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
18 l
Engine Crankcase
2.6 gal (US)
10 l
Transmission
0.8 gal (US)
3.2 l
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential
2 gal (US)
7.5 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Steering
Steering Articulation Angle - Each Direction
40 °
40 °
Maximum Working Pressure - Steering Pump
3,263 psi
22,500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
3.75 turns
Maximum Flow - Steering Pump
22 gal/min
82 l/min
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8 s
2.8 s
Sustainability
Recyclability
95%
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size
17.5 R25 L2 XTLA
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Transmission
Forward and Reverse - Speed Range 2*
12.5 mile/h
20 km/h
Forward and Reverse - Speed Range 3
25 mile/h
40 km/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 1*
6.3 mile/h
10 km/h
Weights
Operating Weight
19,103 lb
8,668 kg
Related Attachments
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity