THIS IS MY SELECT
930M Ag Handler Small Wheel Loader
Maximum Gross Power
168 hp
125 kW
Operating Weight
31,382 lb
14,235 kg
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
Request a Quote
SPECIFICATIONS
The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Buckets
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
101 dB(A)
Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)
68 dB(A)
Dimensions with Bucket - High Lift
Turning Radius - Inside of Tires
9.4 ft
2,851 mm
Width - Tread Center
6.3 ft
1,930 mm
Operating Weight
31,441 lb
14,262 kg
Height - Overall**
18.7 ft
5,698 mm
Dump Angle at Full Lift
48 °
48 °
Height - Ground to Axle Center**
2.25 ft
685 mm
Length - Overall*
27 ft
8,235 mm
Reach - Bucket at 45°*
4.4 ft
1,339 mm
Width - Bucket
8.4 ft
2,550 mm
Height - Ground to Beacon**
12.2 ft
3,707 mm
Length - Hitch to Front Axle
4.9 ft
1,500 mm
Height - Bucket Pin**
14.4 ft
4,400 mm
Clearance - Load over Height**
11.6 ft
3,550 mm
Rack Angle at Full Lift
51 °
51 °
Height - Ground to Cab**
10.9 ft
3,340 mm
Width - Over Tires
8.3 ft
2,540 mm
Dig Depth**
5.3 in
135 mm
Height - Ground Clearance**
1.3 ft
397 mm
Length - Rear Axle to Bumper
6.5 ft
1,993 mm
Departure Angle
33 °
33 °
Length - Wheel Base
9.8 ft
3,000 mm
Note (1)
*Vary with bucket.
Clearance - Bucket at 45°*
10.7 ft
3,272 mm
Carry Height - Bucket Pin
1.9 ft
582 mm
Turning Radius - Outside of Tires
17.7 ft
5,402 mm
Turning Radius - Over Bucket
20.6 ft
6,272 mm
Rack Angle at Carry
47 °
47 °
Note (2)
**Vary with tire.
Clearance - Level Bucket**
13.4 ft
4,073 mm
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Articulation Angle
40 °
40 °
Dimensions with Bucket - Standard Lift
Length - Rear Axle to Bumper
6.5 ft
1,993 mm
Turning Radius - Outside of Tires
17.7 ft
5,402 mm
Height - Ground Clearance**
1.3 ft
397 mm
Height - Overall**
17.1 ft
5,205 mm
Height - Ground to Beacon**
12.2 ft
3,707 mm
Note (1)
*Vary with bucket.
Rack Angle at Carry
43 °
43 °
Carry Height - Bucket Pin
1.3 ft
390 mm
Clearance - Bucket at 45°*
9.1 ft
2,779 mm
Reach - Bucket at 45°*
3.6 ft
1,102 mm
Width - Bucket
8.4 ft
2,550 mm
Clearance - Load over Height**
10.9 ft
3,331 mm
Width - Tread Center
6.3 ft
1,930 mm
Departure Angle
33 °
33 °
Length - Wheel Base
9.8 ft
3,000 mm
Turning Radius - Over Bucket
19.5 ft
5,952 mm
Width - Over Tires
8.3 ft
2,540 mm
Note (2)
**Vary with tire.
Dig Depth**
3.9 in
100 mm
Clearance - Level Bucket**
11.75 ft
3,580 mm
Rack Angle at Full Lift
54 °
54 °
Height - Ground to Axle Center**
2.25 ft
685 mm
Height - Bucket Pin**
12.8 ft
3,907 mm
Operating Weight
31,125 lb
14,118 kg
Turning Radius - Inside of Tires
9.4 ft
2,851 mm
Length - Overall*
24.9 ft
7,593 mm
Length - Hitch to Front Axle
4.9 ft
1,500 mm
Articulation Angle
40 °
40 °
Height - Ground to Cab**
10.9 ft
3,340 mm
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dump Angle at Full Lift
48 °
48 °
Engine
Maximum Gross Power
168 hp
125 kW
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 hp
127 kW
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Rated Gross Power - ISO 14396
168 hp
125 kW
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Engine Model
Cat® C7.1
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 hp
125 kW
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Bore (Standard Power Mode: Range 1-4)
4.1 in
105 mm
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 hp
116 kW
Stroke (Standard Power Mode: Range 1-3**)
5.3 in
135 mm
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 hp
116 kW
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1,600 r/min
1,600 r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 hp
166 hp
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 hp
122 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158 hp
158 hp
Bore (Standard Power Mode: Range 1-3**)
4.1 in
105 mm
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
796 N·m
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795 N·m
586 ft·lbf
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776 N·m
572 ft·lbf
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 hp
122 kW
Displacement (Standard Power Mode: Range 1-3**)
428 in³
7.01 l
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160 hp
119 kW
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162 hp
162 hp
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573 ft·lbf
777 N·m
Maximum Rated Gross Power - ISO 14396 (metric)
170 mhp
170 mhp
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797 N·m
588 ft·lbf
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1,800 r/min
1,800 r/min
Stroke - Performance Power Mode: Range 1-4
5.3 in
135 mm
Displacement (Performance Power Mode: Speed Range 1-4)
428 in³
7.01 l
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
815 N·m
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gpm
190 L/min
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4 in
60 mm
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4,351 psi
30,000 kPa
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in
555 mm
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
728 mm
Relief Pressure - Tilt Cylinder
4,351 psi
30,000 kPa
Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1 s
10.1 s
Maximum Flow - Implement Pump
50 gpm
190 L/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gpm
160 L/min
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7 s
5.7 s
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3 in
110 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8 in
70 mm
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5 s
1.5 s
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1 in
130 mm
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3 s
9.3 s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7 s
2.7 s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1 s
5.1 s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7 s
2.7 s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4,061 psi
28,000 kPa
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7 s
1.7 s
Maximum Working Pressure - Implement Pump
4,061 psi
28,000 kPa
Operating Specifications
Full Turn Tip Load
19,424 lb
8,811 kg
Power Train
Front Axle - Traction Aid*
Locking differential standard
Rear Axle - Traction Aid
Limited slip differential optional
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
± 10.5 degrees
Note
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Brakes - Service
Inboard wet disc
Brakes - Parking
Spring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
± 7 degrees
Rear Axle
Oscillating
Note (2)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle
Fixed
Service Refill Capacities
Transmission - Gear Box
2.2 gal (US)
8.5 l
Cooling System
7.9 gal (US)
30 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Fuel Tank
51.5 gal (US)
195 l
Axles - Rear
6.6 gal (US)
25 l
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Engine Crankcase
5.3 gal (US)
20 l
Axles - Front
6.9 gal (US)
26 l
Hydraulic Tank
23.8 gal (US)
90 l
Steering
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns
3.5 turns
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Maximum Flow - Steering Pump
34 gpm
130 L/min
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump
3,500 psi
24,130 kPa
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Steering Articulation Angle - Each Direction
40°
Sustainability
Recyclability
94%
Tires
Other Choices Include
20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Standard Size
20.5 R25, radial (L-3)
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Transmission
Forward - Range 4
25 mile/h
40 km/h
Reverse - Range 1*
8 mile/h
13 km/h
Reverse - Range 3
17 mile/h
27 km/h
Forward - Range 2
8 mile/h
13 km/h
Forward - Range 1*
1-13 km/h (0.6-8 mph)
Reverse - Range 4
25 mile/h
40 km/h
Reverse - Range 2
8 mile/h
13 km/h
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.
Forward - Range 3
17 mile/h
27 km/h
Weights
Operating Weight
31,382 lb
14,235 kg
- POWER TRAIN
- Auto idle shut down feature
- Cat C7.1 engine
- Power modes (Standard and Performance)
- Power by range (High Power in Range 4)
- Turbocharged and aftercooled
- Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Oil sampling ports
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
- Operator modes (Default, TC, Hystat™, and Ice)
- Directional Shift Aggressiveness (fast, medium, slow)
- Rimpull control, adjust wheel torque
- Creeper control, adjust ground speed
- Axle Duo-Cone™ seal guards
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Throttle lock and max speed limiter
- HYDRAULICS
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Load sensing hydraulics and steering
- ELECTRICAL
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Halogen work and roading lights, LED rear tail lights
- Product Link™ PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
- OPERATOR ENVIRONMENT
- Cab, pressurized
- 75 mm (3 in) retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- External heated mirrors with lower parabolic
- Hydraulic control lockout
- Ground level cab door release
- Suspension seat, fabric
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Mirror, single
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Camera, rear view
- OTHER STANDARD EQUIPMENT
- Cat optimized Z-bar linkage with parallel lift
- Large-access enclosure doors with adjustable close/open force
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
- OPTIONAL EQUIPMENT
- Auto lube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
- Camera, rear view integrated into advanced display
- Electrically adjustable external heated mirrors (2)
- Secondary display to enable features and adjust parameters
- LED interior lighting
- Sunscreen, front and rear
- Touchscreen secondary display
- Ride control adjustable speed activation
- Preventative maintenance reminders
- Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cat Production Measurement weigh scale system integrated into secondary display
- Cold start package
- Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Coupler, (Fusion and ISO 23727)
- Fenders (extended cover and full coverage)
- Differential, limited slip, rear
- Guarding packages
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Linkage, high lift
- Payload Technology
- Cat Production Measurement (CPM)
- CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Ride Control System, adjustable through secondary display
- Seats
- Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
- Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering
- Dual mode and secondary
- Tire Pressure Monitoring (TPM)
- Counterweight, additional options
- Debris packages (low, medium, high)
- Rear Object Detection
Related Attachments
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity
