THIS IS MY SELECT
930M Waste Handler Small Wheel Loader
Maximum Gross Power
168 hp
125 kW
Operating Weight
37,713 lb
17,107 kg
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
Request a Quote
SPECIFICATIONS
The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Buckets
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.<br>– The Blue Angel environmental label is an optional attachment for Europe only.
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)
68 dB(A)
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
101 dB(A)
Engine
Maximum Gross Power
168 hp
125 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.
Engine Model
Cat® C7.1
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
777 N·m
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
588 ft·lbf
797 N·m
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 hp
119 kW
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
572 ft·lbf
776 N·m
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
587 ft·lbf
796 N·m
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 hp
122 kW
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
170 hp
125 kW
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 hp
122 kW
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 hp
122 kW
Engine Power - ISO 14396 - Metric
170 hp
125 kW
Engine Power - ISO 14396:2002
168 hp
125 kW
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
162 hp
119 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 hp
116 kW
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 hp
116 kW
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf
795 N·m
Net Power (Standard Power Mode: Range 1-3*)
1,600 r/min
1,600 r/min
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 hp
116 kW
Net Power (Performance Power Mode: Range 1-4)
1,800 r/min
1,800 r/min
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
815 N·m
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1,800 r/min
1,800 r/min
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 hp
125 kW
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1,600 r/min
1,600 r/min
Loader Hydraulic System
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.7 in
120 mm
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
728 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
3.5 in
90 mm
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gpm
160 L/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4,061 psi
28,000 kPa
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gpm
190 L/min
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.9 in
150 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.6 in
65 mm
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in
555 mm
Maximum Flow - Implement Pump
50 gpm
190 L/min
Maximum Working Pressure - Implement Pump
3,771 psi
26,000 kPa
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4,061 psi
28,000 kPa
Relief Pressure - Tilt Cylinder
4,061 psi
28,000 kPa
Operating Specifications
Note (2)
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
Note (1)
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
Full Turn Tip Load (2)
9525 kg (20,998 lb)^
Full Turn Tip Load (1)
8573 kg (18,900 lb)**
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Note (2)
Offset rims available to meet European roading requirements.
Front Axle
Fixed
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Rear Axle - Traction Aid - Optional
Limited slip differential
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder
± 7 degrees
Note (3)
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle
Oscillating
Brakes - Parking
Spring applied hydraulically released
Front Axle - Traction Aid
Locking differential
Brakes - Service
Inboard wet disc
Service Refill Capacities
Engine Crankcase
5.3 gal (US)
20 l
Fuel Tank
51.5 gal (US)
195 l
Hydraulic Tank
23.8 gal (US)
90 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Cooling System
7.9 gal (US)
30 l
Axles - Rear
6.6 gal (US)
25 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Axles - Front
6.9 gal (US)
26 l
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Steering Torque - 0° (Straight Machine)
37,155 ft·lbf
50,375 N·m
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Maximum Flow - Steering Pump
34 gpm
130 L/min
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Maximum Working Pressure - Steering Pump
3,500 psi
24,130 kPa
Maximum Steering Torque - 40° (Full Turn)
27,747 ft·lbf
37,620 N·m
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Sustainability
Recyclability
94%
Transmission
Forward and Reverse - Range 3
17 mile/h
27 km/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 4
25 mile/h
40 km/h
Forward and Reverse - Range 2
8 mile/h
13 km/h
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Weights
Operating Weight
37,713 lb
17,107 kg
Note (2)
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
Note (1)
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
Operating Weight (1)
15 381 kg (33,908 lb)**
Operating Weight (2)
17 107 kg (37,713 lb)^
- POWER TRAIN
- Axle Duo-Cone™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life) - Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed - Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
- HYDRAULICS
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
- ELECTRICAL
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
- OPERATOR ENVIRONMENT
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
- OTHER STANDARD EQUIPMENT
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
- OPTIONAL EQUIPMENT
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages) - Camera, roof mounted, front view with separate display
- Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total) - Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer - Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest. - Steering
– Dual mode and secondary - Tire Pressure Monitoring (TPM)
Related Attachments
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity
