THIS IS MY SELECT
926M Aggregate Handler Small Wheel Loader
Maximum Gross Power
168 hp
125 kW
Operating Weight
28,577 lb
12,963 kg
Bucket Capacities
2.5-5.0 m3 (3.3-6.5 yd3)
Request a Quote
SPECIFICATIONS
The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Buckets
Bucket Capacities
2.5-5.0 m3 (3.3-6.5 yd3)
Cab
ROPS
ISO 3471:2008
Declared Sound Levels
Declared Sound Levels<br>– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*<br>– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
FOPS
ISO 3449:2005 LEVEL II
Note (1)
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Engine
Maximum Gross Power
168 hp
125 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Engine Model
Cat® C7.1
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 hp
119 kW
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1,600 r/min
1,600 r/min
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
777 N·m
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 hp
125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
815 N·m
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1,800 r/min
1,800 r/min
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
588 ft·lbf
797 N·m
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
170 hp
125 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 hp
122 kW
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 hp
122 kW
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 hp
122 kW
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
796 N·m
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
162 hp
119 kW
Maximum Rated Gross Power - ISO 14396 (metric)
170 hp
125 kW
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 hp
116 kW
Net Power (Standard Power Mode: Range 1-3*)
1,600 r/min
1,600 r/min
Net Power (Performance Power Mode: Range 1-4)
1,800 r/min
1,800 r/min
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 hp
116 kW
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*)
572 ft·lbf
776 N·m
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 hp
116 kW
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf
795 N·m
Maximum Rated Gross Power - ISO 14396
168 hp
125 kW
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
40 gpm
150 L/min
Tilt Cylinder, Double Acting - Rod Diameter
3 in
75 mm
Lift Cylinder, Double Acting - Rod Diameter
2.4 in
60 mm
Lift Cylinder, Double Acting - Stroke
28.7 in
728 mm
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.6/2.6 seconds
Lift Cylinder, Double Acting - Bore Diameter
4.3 in
110 mm
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4,061 psi
28,000 kPa
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3,771 psi
26,000 kPa
Relief Pressure - Tilt Cylinder
4,061 psi
28,000 kPa
Tilt Cylinder, Double Acting - Stroke
20.3 in
516 mm
Maximum Flow - Implement Pump
40 gpm
150 L/min
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.5/6.2 seconds
Maximum Working Pressure - Implement Pump
3,771 psi
26,000 kPa
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.6/10.5 seconds
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
40 gpm
150 L/min
Tilt Cylinder, Double Acting - Bore Diameter
5.5 in
140 mm
Operating Specifications
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load (1)
8047 kg (17,740 lb)**
Full Turn Tip Load (2)
8148 kg (17,962 lb)~
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Power Train
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25
± 13.5 degrees
Note (2)
Offset rims available to meet European roading requirements.
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Front Axle
Fixed
Front Axle - Traction Aid*
Locking differential (standard)
Brakes - Service
Inboard wet disc
Rear Axle
Oscillating
Brakes - Parking
Spring applied hydraulically released
Rear Axle - Traction Aid - Optional
Limited slip differential
Service Refill Capacities
Hydraulic Tank
23.8 gal (US)
90 l
Hydraulic System - Including Tank
42.3 gal (US)
160 l
Cooling System
7.9 gal (US)
30 l
Fuel Tank
51.5 gal (US)
195 l
Rear Axles
6.6 gal (US)
25 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Front Axles
6.9 gal (US)
26 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Engine Crankcase
5.3 gal (US)
20 l
Steering
Maximum Flow - Steering Pump
34 gpm
130 L/min
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump
3,500 psi
24,130 kPa
Sustainability
Recyclability
94%
Transmission
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 3
17 mile/h
27 km/h
Forward and Reverse - Range 4
25 mile/h
40 km/h
Forward and Reverse - Range 2
8 mile/h
13 km/h
Weights
Operating Weight
28,577 lb
12,963 kg
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Operating Weight (2)
12 963 kg (28,577 lb)~
Operating Weight (1)
12 891 kg (28,418 lb)**
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
- POWER TRAIN
- Axle Duo-Cone™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life) - Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed - Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
- HYDRAULICS
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
- ELECTRICAL
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
- OPERATOR ENVIRONMENT
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
- OTHER STANDARD EQUIPMENT
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
- OPTIONAL EQUIPMENT
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages) - Camera, roof mounted, front view with separate display
- Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total) - Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer - Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest. - Steering
– Dual mode and secondary - Tire Pressure Monitoring (TPM)
Related Attachments
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity
