THIS IS MY SELECT
D2 Dozer
Engine Model
Cat® C3.6
Power - Net
92 hp
68.8 kW
Operating Weight
18,382 lb
8,338 kg
SPECIFICATIONS
The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (4.0 lbs) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.873 tons). If machine is equipped with R1234yf (Global Warming Potential = 0.501), the system contains 1.7 kg (3.75 lbs) of refrigerant, which has a CO2 equivalent of less than 0.001 metric tonnes (0.001 tons).
Cab
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
Dimensions
BLADE: Blade Lift Height - LGP
27.9 in
708 mm
Dozer Height - LGP
108.9 in
2,765 mm
BLADE: Digging Depth - LGP
23.2 in
589 mm
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
2,874 mm
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
2,360 mm
Ground Clearance - LGP
13 in
332 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
Overall Length - With Blade - LGP
168.2 in
4,272 mm
BLADE: Blade Width - LGP
124 in
3,149 mm
BLADE: Maximum Tilt - LGP
17.2 in
438 mm
Track Gauge - LGP
67.9 in
1,725 mm
BLADE: Blade Height - LGP
35.8 in
910 mm
BLADE: Blade Capacity (SAE) - LGP
2.42 yd³
1.85 m³
BLADE: Maximum Angle (either side) - LGP
25°
Note
Abrasion Undercarriage
Length of Basic Dozer (without blade) - LGP
129.5 in
3,290 mm
Width of Dozer (standard shoes, no blade) - Standard
79.1 in
2,010 mm
Dozer Height - Standard
108.9 in
2,765 mm
Length of Basic Dozer (without blade) - Standard
129.5 in
3,290 mm
Dimensions
Overall Length - With Blade - Standard
168.5 in
4,281 mm
Track Gauge - Standard
61 in
1,550 mm
BLADE: Blade Capacity (SAE) - Standard
2.59 yd³
1.98 m³
BLADE: Maximum Angle (either side) - Standard
25°
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
BLADE: Blade Width - Standard
109.5 in
2,782 mm
Ground Clearance - Standard
13 in
332 mm
BLADE: Maximum Tilt - Standard
15.2 in
387 mm
BLADE: Digging Depth - Standard
23.3 in
593 mm
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Lift Height - Standard
29.3 in
743 mm
BLADE: Blade Width at Maximum Angle - Standard
100.1 in
2,542 mm
BLADE: Blade Height - Standard
39.8 in
1,010 mm
Engine
Engine Model
Cat® C3.6
Power - Net
92 hp
68.8 kW
Displacement
220 in³
3.6 l
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
92 hp
68.8 kW
Net Power - 2,200 rpm - SAE J1349
92 hp
68.8 kW
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Engine
Power Train
Hydrostatic
High Performance Winch
Maximum line pull – full drum
25,000 lb
11,340 kg
Throat clearance
6.75 in
171.5 mm
Rope diameter – recommended
0.63 in
16 mm
Maximum line speed – bare drum
131 ft/min
40 m/min
Drum width
10.8 in
274 mm
Drum capacity – recommended cable
371 ft
113 m
Overall width
29.2 in
741 mm
Rope diameter – optional
0.75 in
19 mm
Winch length
27.76 in
705 mm
Control
Hydraulic
Maximum line speed – full drum
207 ft/min
63 m/min
Drum capacity – optional
256 ft
78 m
Weight
1,345 lb
610 kg
Speed
Variable
Drum diameter
10 in
254 mm
Maximum line pull – bare drum
40,000 lb
18,144 kg
Winch drive
Hydrostatic
Hydraulic Controls
Pump Output
17.2 gpm
65 L/min
Relief Valve Settings
2,988 psi
20,600 kPa
Retrieval Winch
Drum Width
9.65 in
245 mm
Drum Diameter
8 in
203.2 mm
Control
Hydraulic
Overall width
27.91 in
709 mm
Speed
Variable
Maximum Line Pull - Bare Drum
32,150 lb
14,583 kg
Drum Capacity - Recommended Cable
277 ft
84 m
Maximum Line Speed - Bare Drum
50 ft/min
15 m/min
Winch Drive
Hydraulic
Rope Diameter - Optional
0.75 in
19 mm
Rope Diameter - Recommended
0.63 in
16 mm
Drum Capacity - Optional Cable
195 ft
59 m
Weight
1,747 lb
794 kg
Winch Length
35.63 in
905 mm
Maximum Line Pull - Full Drum
20,350 lb
9,231 kg
Throat Clearance
5.6 in
141.4 mm
Maximum Line Speed - Full Drum
79 ft/min
24 m/min
Ripper
Type
Parallelogram
Number of Shanks
3
Height
6.5 in
165 mm
Weight
1,222 lb
554 kg
Maximum Digging Depth
13.3 in
337.5 mm
Maximum Ground Clearance Under Tip
17.6 in
448 mm
Overall Width
67.3 in
1,710 mm
Maximum Reach - Ground Line
30.2 in
766 mm
Service Refill Capacities
Fuel Tank
51.5 gal (US)
195 l
Crankcase - With Filter
2.8 gal (US)
10.5 l
Final Drive - Each - LGP
2.6 gal (US)
10 l
Cooling System
5 gal (US)
19 l
Transmission - Hydraulic Tank
23.8 gal (US)
90 l
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
19 l
Service Refill Capacities
Final Drives - Each Side
2.6 gal (US)
10 l
Transmission
Drive Pumps
1
Relief Valve Settings
7,033 psi
48,500 kPa
Track Motors
2
Maximum Travel Speed - Reverse
6.2 mile/h
10 km/h
Maximum Travel Speed - Forward
5.6 mile/h
9 km/h
Undercarriage
Track Gauge - LGP
68 in
1,725 mm
Ground Pressure - LGP
4.3 psi
29.7 kPa
Track Gauge
61 in
1,550 mm
Number of Rollers - Each Side
7
Length - Track on Ground - LGP
89 in
2,248 mm
Shoe Width - Standard
18 in
460 mm
Shoe Width - LGP
25 in
635 mm
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Undercarriage
Number of Shoes - Each Side - Abrasion Undercarriage
38
Ground Pressure
5.7 psi
39.5 kPa
Length of Track on Ground
89 in
2,248 mm
Weights
Operating Weight
18,382 lb
8,338 kg
Operating Weight
18,382 lb
8,338 kg
Operating Weight - LGP
19,066 lb
8,648 kg
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Winch
Weight
1,345 lb
610 kg
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Rope Diameter - Optional
0.75 in
19 mm
Drum Width
10.8 in
274 mm
Rope Diameter - Recommended
0.63 in
16 mm
Maximum Line Speed - Bare Drum
131 ft/min
40 m/min
Drum Diameter
10 in
254 mm
Throat Clearance
6.75 in
171.5 mm
Drum Capacity - Optional Cable
256 ft
78 m
Drum Capacity - Recommended Cable
371 ft
113 m
Maximum Line Pull - Full Drum
25,000 lb
11,340 kg
Maximum Line Speed - Full Drum
207 ft/min
63 m/min
Overall Width
29.2 in
741 mm
Winch Length
27.76 in
705 mm
Maximum Line Pull - Bare Drum
40,000 lb
18,144 kg
- POWER TRAIN
- Air cleaner with precleaner, automatic dust ejection and under hood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
- ELECTRICAL
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
- UNDERCARRIAGE
- Heavy Duty (HD) Undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Seven roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
- HYDRAULIC
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
- CAT TECHNOLOGY
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Cat Product Link™ PLE643/PLE743 Cellular
- Third party 3D grade system compatible
- Stable Blade – Basic Lift
- Slope Indicate
- ATTACHMENTS
- Rigid drawbar
- Front pull device
- OPERATOR ENVIRONMENT
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
- POWER TRAIN
- Air cleaner with external precleaner
- Installation, winch
- ELECTRICAL
- Four integrated front LED lights, two rear LED
- UNDERCARRIAGE
- Abrasion Undercarriage (38 section)
- Track Pairs
– Track, 460 mm (18 in)
– Track, 635 mm (25 in)
- HYDRAULIC
- Four valve for use with ripper
- Four valve for use with winch
- CAT TECHNOLOGY
- Cat Grade with Slope Assist
- Cat Command Station (availability varies by region
- Cat Command Console (availability varies by region)
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry
- ATTACHMENTS
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
- OPERATOR ENVIRONMENT
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspended, cloth or vinyl
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
- OTHER
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity
