Cat Water Solutions: 777 (07) Off-Highway Water Truck

ISO 3450:2011

Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.

Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.

The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.

The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid-gear moving operation is 83 dB(A).

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

5

2

2

0

Wet water pump/hydraulic motor coupling

Operator selectable coverage: 0.1 - 0.8 L/m² (4 kph - 40 kph) / 0.05 - 0.2 gal/ft² (3 mph - 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration.

Spray head opening is automatically controlled by the system to achieve Auto Mode Coverage or manual mode flow rate.

The Auto Mode setting controls water coverage and automatically adjusts to the number of spray heads being used — independent of ground speed. This is an exclusive feature designed into the Cat WDS software to help water more efficiently. Water flow is continually adjusted during operation to conserve water and achieve desired coverage and flow rate.

Alternatively, manual mode allows the operator to set a water flow rate that is constant regardless of ground speed. This mode is not recommended for daily operation and will reduce watering efficiency and may increase fuel usage.

Spray heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray.

Cannon performance depends on nozzle orifice and pipe size.

Cat® C32B

Fuel Optimized

12

Net Power advertised is the power available at the flywheel when
the engine is equipped with fan, air cleaner, muffler, and alternator
with engine speed at 1,800 rpm.

Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.

Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).

No engine derating required up to 2286 m (7,500 ft) for HRC and 4572 m (15,000 ft) for LRC machines.

Available as Tier 4 Final/Stage V equivalent or Tier 2/Stage II equivalent emission standards.

2.736:1

7.0:1

19.1576:1

Water Tank Capacity Range: 69 700 - 75 700 L (18,400 - 20,000 gal)

Operator selectable coverage: 0.2-0.8 L/m² (4 kph - 40 kph) / 0.5-0.2 gal/ft² (3 mph - 25 mph)

ISO 5010:2007

up to 75 700 L (20,000 gal)

Multiple tank configurations are offered based on customer preference and regional locations. Water Tank Capacity Range: 75 400 - 75 700 L (19,900 - 20,000 gal)

327,964 - 327,964 lb / 147 172 - 148 762 kg

160,307 - 162,323 lb / 72 714 - 73 629 kg

42,983 - 44,092 lb / 19 497 - 20 000 kg

Hoist cylinder mounting on all tank offerings enhances serviceability.

Number of spray heads can be customized based on customer needs and preferred watering techniques. Option for 3 - 5 spray heads mounted on the back of the water tank. Additional option for spray heads on each side of the water tank.

Water cannon arrangement typically mounts to the front of the water tank.

27.00R49 (E4)

Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.

Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.

Maximum travel speeds with standard 27.00R49 (E4) tires.