THIS IS MY SELECT
986 Wheel Loader
Net Power
373 HP
278 kW
Operating Weight
98,806 lb
44,818 kg
Bucket Capacities
5-10,3 m³ (6,5-13,5 yd.³)
SPECIFICATIONS
Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).
Axles
Front
Fixed
Rear
Trunnion
Oscillation Angle
±12.5°
Oscillation Angle - Chain Arrangement
±8.5°
Brakes
Brakes
ISO 3450:2011
Buckets
Bucket Capacities
5-10,3 m³ (6,5-13,5 yd.³)
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
13.5 ft
4,100 mm
Ground to Top of Exhaust Stacks
13.3 ft
4,060 mm
Ground to Top of Hood
10.7 ft
3,270 mm
Ground to Center of Front Axle
3.2 ft
978 mm
Ground to Fuel Tank Clearance
2.3 ft
691 mm
Ground to Lower Hitch Clearance
1.5 ft
459 mm
Reach - Maximum Lift
7.4 ft
2,248 mm
Clearance at Maximum Lift
11.6 ft
3,538 mm
B-Pin Height - Maximum Lift
17.6 ft
5,371 mm
Maximum Overall Height - Bucket Raised
23.9 ft
7,276 mm
Rear Axle - Centerline to Bumper
10.3 ft
3,132 mm
Wheel Base
12.5 ft
3,810 mm
Maximum Overall Length
38 ft
11,591 mm
Front Axle Centerline to Bucket Tip
15.3 ft
4,649 mm
Note
<ul><li>All dimensions are approximate.</li><li>Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.</li></ul>
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS
13.5 ft
4,100 mm
Ground to Top of Exhaust Stacks
13.3 ft
4,060 mm
Ground to Top of Hood
10.7 ft
3,270 mm
Ground to Center of Rear Axle
3.2 ft
978 mm
Ground to Fuel Tank Clearance
2.3 ft
691 mm
Ground to Lower Hitch Clearance
1.5 ft
459 mm
Reach at Maximum Lift
8 ft
2,437 mm
Clearance at Maximum Lift
10.7 ft
3,259 mm
B-Pin Height at Maximum Lift
15 ft
4,566 mm
Maximum Overall Height, Bucket Raised
20.9 ft
6,359 mm
Rear Axle Center Line to Bumper
10.3 ft
3,132 mm
Wheel Base
12.5 ft
3,810 mm
Maximum Overall Length
35 ft
10,671 mm
Front Axle Centerline to Bucket Tip
12.2 ft
3,729 mm
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS
13.5 ft
4,100 mm
Ground to Top of Exhaust Stacks
13.3 ft
4,060 mm
Ground to Top of Hood
10.7 ft
3,270 mm
Ground to Center of Rear Axle
3.2 ft
978 mm
Ground to Fuel Tank Clearance
2.3 ft
691 mm
Ground to Lower Hitch Clearance
1.5 ft
459 mm
B-Pin Height at Maximum Lift
15 ft
4,566 mm
Rear Axle Center Line to Bumper
10.3 ft
3,132 mm
Wheel Base
12.5 ft
3,810 mm
Maximum Overall Length
35.4 ft
10,776 mm
Front Axle Centerline to Bucket Tip
12.6 ft
3,834 mm
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
13.5 ft
4,100 mm
Ground to Top of Exhaust Stacks
13.3 ft
4,060 mm
Ground to Top of Hood
10.7 ft
3,270 mm
Ground to Center of Front Axle
3.2 ft
978 mm
Ground to Fuel Tank Clearance
2.3 ft
691 mm
Ground to Lower Hitch Clearance
1.5 ft
459 mm
Reach - Maximum Lift
7.1 ft
2,175 mm
Clearance at Maximum Lift
10.1 ft
3,079 mm
B-Pin Height - Maximum Lift
16.1 ft
4,912 mm
Maximum Overall Height - Bucket Raised
22.4 ft
6,817 mm
Rear Axle - Centerline to Bumper
10.3 ft
3,132 mm
Wheel Base
12.5 ft
3,810 mm
Maximum Overall Length
36.6 ft
11,143 mm
Front Axle Centerline to Bucket Tip
13.8 ft
4,201 mm
Note
<ul><li>All dimensions are approximate.</li><li>Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.</li></ul>
Engine
Net Power
373 HP
278 kW
Engine Model
Cat® C15
Emissions
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Gross Power - ISO 14396
449 HP
335 kW
Peak Power Speed - 1,600 rpm - SAE J1995
456 HP
340 kW
Peak Power Speed - 1,600 rpm - SAE J1995 (DIN)
462 HP
340 kW
Peak Power Speed - 1,600 rpm - ISO 14396
449 HP
335 kW
Peak Power Speed - 1,600 rpm - ISO 14396 (DIN)
455 HP
335 kW
Rated Speed - 2,000 rpm - EEC 80/1269
373 hp
278 kW
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
378 hp
278 kW
Rated Speed - 2,000 rpm - ISO 9249
373 hp
278 kW
Rated Speed - 2,000 rpm - ISO 9249 (DIN)
378 hp
278 kW
Rated Speed - 2,000 rpm - SAE J1349
373 HP
278 kW
Rated Speed - 2,000 rpm - SAE J1349 (DIN)
378 HP
278 kW
Bore
5.4 in
137 mm
Stroke
6.75 in
171.5 mm
Displacement
927 in²
15.2 l
Peak Torque - 1,200 rpm - SAE J1995
1,778 lb/ft
2,411 N·m
Torque Rise
16%
Peak Power Speed
1600
Peak Power Speed - Gross - SAE J1995
456 hp
340 kW
Engine Power - ISO 14396
449 hp
335 kW
Net Power - SAE J1349:2011
373 hp
278 kW
Rated Speed
2000
Engine Power - ISO 14396:2002
449 hp
335 kW
Gross Power - SAE J1995:2014
456 hp
340 kW
Peak Torque (1,200 rpm) - SAE J1995:2014
1,778 lb/ft
2,411 N·m
Note
Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. • Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Note (1)
Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Hydraulic Cycle Times
Rack Back
4.5 s
4.5 s
Raise
9 s
9 s
Dump
3.5 s
3.5 s
Lower
5.2 s
5.2 s
Lower Float Down
4.3 s
4.3 s
Total Hydraulic Cycle Time
21.3 s
21.3 s
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Load Sense
Lift/Tilt System - Pump
2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm
123 gpm
470 L/min
Relief Valve Setting - Lift/Tilt
4,050 psi
27,900 kPa
Lift Cylinder - Bore
7.5 in
190 mm
Lift Cylinder - Stroke
45 in
1,138 mm
Tilt Cylinder - Bore
6.7 in
170 mm
Tilt Cylinder - Stroke
28.4 in
722 mm
Hydraulic System - Steering
ISO 5010:2007 - Steering System - Circuit
Load Sense
ISO 5010:2007 - Steering System - Pump
Piston, variable displacement
ISO 5010:2007 - Maximum Flow at 1,400 rpm
52 gal/min
200 l/min
ISO 5010:2007 - Steering Cutoff Pressure
4,000 psi
27,600 kPa
ISO 5010:2007 - Total Steering Angle
70°
Steering System - Circuit
Load Sense
Steering System - Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
52 gpm
200 L/min
Steering Cut Off Pressure
4,000 psi
27,600 kPa
Total Steering Angle
70°
Operating Specifications
Operating Weight
98,806 lb
44,818 kg
Operating Weight - Standard
97,785 lb
44,355 kg
Operating Weight - High Lift
104,005 lb
47,175 kg
Rated Payload - Quarry Face
11 ton (US)
10 t
Rated Payload - Loose Material (Standard)
14 ton (US)
12.7 t
Rated Payload - Loose Material (High Lift)
12.1 ton (US)
11 t
Rated Payload - Standard (Quarry Face)
11 ton (US)
10 t
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
14 ton (US)
12.7 t
Rated Payload - High Lift (Quarry Face)
11 ton (US)
10 t
Rated Payload - High Lift (Low to Moderate Digging Resistance)
12.1 ton (US)
11 t
Bucket Capacity Range
5.0-10.3 m³ (6.5-13.5 yd³)
Cat Truck Match - Standard
770/735/740/745
Cat Truck Match - High Lift
772/773
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Service Refill Capacities
Fuel Tank
141 gal (US)
535 l
Fuel Tank - Short Lift
127 gal (US)
481 l
Cooling Systems
26 gal (US)
100 l
Crankcase
9 gal (US)
34 l
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only)
6 gal (US)
23 l
Transmission
20 gal (US)
75 l
Axle Oil - Differentials and Final Drives - Front
49 gal (US)
186 l
Axle Oil - Differentials and Final Drives - Rear
45 gal (US)
170 l
Hydraulic System Factory Fill
87 gal (US)
330 l
Hydraulic System - Tank Only
34 gal (US)
130 l
Diesel Exhaust Fluid Tank
6 gal (US)
23 l
Sound Performance - Standard
Operator Sound Level (ISO 6396)
72 dB(A)
72 dB(A)
Machine Sound Level (ISO 6395)
112 dB(A)
112 dB(A)
Note
<ul><li>The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li></ul>
Sound Performance - Suppression
Operator Sound Level (ISO 6396)
72 dB(A)
72 dB(A)
Machine Sound Level (ISO 6395)
110 dB(A)
110 dB(A)
Note
<ul><li>The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li><li>Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.</li><li>The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.</li></ul>
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
74 dB(A)
74 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
73 dB(A)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
113 dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
110 dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
72 dB(A)
Transmission
Transmission Type
Cat planetary power shift
Forward - 1
5 mile/h
7.3 km/h
Forward - 2
8 mile/h
12.2 km/h
Direct Drive - Forward 2
8 mile/h
12.7 km/h
Direct Drive - Forward 3
14 mile/h
22 km/h
Direct Drive - Forward 4
24 mile/h
39 km/h
Reverse - 1
5 mile/h
7.6 km/h
Reverse - 2
8 mile/h
13.6 km/h
Direct Drive - Reverse 2
9 mile/h
14.1 km/h
Direct Drive - Reverse 3
16 mile/h
25 km/h
Direct Drive - Reverse 4
25.4 mile/h
40.8 km/h
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- ELECTRICAL
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, maintenance-free
- Converter, 10/15 amp, 24V to 12V
- Lighting system (LED, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Auxiliary jump start receptacle
- OPERATOR ENVIRONMENT
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Cat Vision, rear vision camera system
- Cat Production Measurement ready
- Cab precleaner
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Powertrain oil temperature - Light, cab, dome
- Lunchbox, beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC™) System
- UV glass
- Transmission gear indicator
- Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers - Lights, directional
- POWERTRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Crankcase guard
- Electro hydraulic parking brake
- Engine, C15 MEUI diesel, turbocharged/aftercooled
- Ground level engine shutdown switch
- Turbine precleaner, engine air intake
- Starting aid, ether, automatic
- Torque converter, Neutralizer
- Transmission, planetary powershift, 4F/3R electronic control
- Manual switch and automatic fuel priming
- OTHER
- Automatic bucket lift kickout/positioner
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, steering and brake filtration/screening system
- Cat® Clean Emission Module
- Oil sampling valves
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWERTRAIN
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
- MISCELLANEOUS ATTACHMENTS
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Cold Weather Starting (extra two batteries)
- OTHER OPTIONAL CONFIGURATIONS
- Aggregate Handler
- Block Handler
- OPERATOR ENVIRONMENT
- Cat® Detect, object detection system
- Cat Production Measurement
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window pull down visor
- Handrail mounted mirrors
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity
