THIS IS MY SELECT

Engine Power @ 1,600 rpm - ISO 14396:2002

321 HP

Operating Weight

51,124 lb

Bucket Range

2.8-11.9 m³ 3.75-15.5 yd³

SPECIFICATIONS

The Cat® 966 Wheel Loader brings premium performance with simple-to-use technologies as a standard offering, boosting operator efficiencies and delivering increased productivity. Extended service intervals lower maintenance costs. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.

    Air Conditioning System

    Air Conditioning

    The air conditioning system on this machine contains the fluorinated
    greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
    The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2
    equivalent 2.288 metric tonnes (2.522 tons).

    Bucket Capacities

    Bucket Range

    2.8-11.9 m³ 3.75-15.5 yd³

    Dimensions

    Note

    All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift

    Centerline of Rear Axle to Edge of Counterweight

    8.1 ft

    Centerline of Rear Axle to Hitch

    5.1 ft

    Ground Clearance

    1.4 ft

    Height - Top of Exhaust Pipe

    11.8 ft

    Height - Top of Hood

    9.5 ft

    Height - Top of ROPS

    11.1 ft

    Hinge Pin Height at Carry

    2.6 ft

    Hinge Pin Height at Maximum Lift

    15.9 ft

    Lift Arm Clearance at Maximum Lift

    13.8 ft

    Overall Length - Without Bucket

    26.6 ft

    Tread Width

    7.3 ft

    Wheel Base

    11.8 ft

    Width over Tires (Loaded)

    9.11 ft

    Rack Back - Maximum Lift

    71 degrees

    Rack Back - Carry Height

    49 degrees

    Rack Back at Ground

    37 degrees

    Dimensions - Standard Lift

    Centerline of Rear Axle to Edge of Counterweight

    7.7 ft

    Centerline of Rear Axle to Hitch

    5.1 ft

    Ground Clearance

    424 mm

    Height - Top of Exhaust Pipe

    3,531 mm

    Height - Top of Hood

    2,850 mm

    Height - Top of ROPS

    3,593 mm

    Hinge Pin Height at Carry

    ft

    Hinge Pin Height at Maximum Lift

    4,245 mm

    Lift Arm Clearance at Maximum Lift

    3,687 mm

    Overall Length - Without Bucket

    7,399 mm

    Tread Width

    7.3 ft

    Wheel Base

    3,550 mm

    Rack Back - Maximum Lift

    62 degrees

    Rack Back - Carry Height

    50 degrees

    Rack Back at Ground

    39 degrees

    Width over Tires (Loaded)

    9.11 ft

    Engine

    Engine Power @ 1,600 rpm - ISO 14396:2002

    321 HP

    Gross Power @ 1,600 rpm - SAE J1995:2014

    325 HP

    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011

    303 HP

    Engine Model

    Cat C9.3B

    Note (1)

    Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.

    Note (2)

    The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.

    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011

    1,255 ft-lb

    Displacement

    9.3 L

    Note (3)

    Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.

    Gross Torque @ 1,200 rpm – SAE J1995:2014

    1,327 lb/ft

    Engine Torque @ 1,200 rpm – ISO 14396:2002

    1,313 lb/ft

    Hydraulic System

    Implement System - Maximum Operating Pressure

    4,496 psi

    Implement System - Maximum Pump Output at 2,250 rpm

    99 gal/min

    Hydraulic Cycle Time - Total

    10.1 seconds

    Operating Specifications

    Breakout Force

    38,999 lb

    Note (1)

    For a machine configuration as defined under Weight.

    Note (2)

    Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

    Static Tipping Load - Full 40° Turn - No Tire Deflection

    15,981 kg

    Static Tipping Load - Full 40° Turn - With Tire Deflection

    32,727 lb

    Service Refill Capacities

    Cooling System

    17.4 gal (US)

    Crankcase

    6.1 gal (US)

    DEF Tank

    6.9 gal (US)

    Differential - Final Drives - Front

    15.1 gal (US)

    Differential - Final Drives - Rear

    15.1 gal (US)

    Fuel Tank

    80.1 gal (US)

    Hydraulic Tank

    30.1 gal (US)

    Transmission

    15.5 gal (US)

    Sound

    Note (1)

    ** For machines in European Union countries and in countries that adopt the EU Directives.

    Note (2)

    ***European Union Directive 2000/14/EC as amended by 2005/88/EC.

    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*

    108

    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)

    69 dB(A)

    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)

    109 dB(A)

    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)

    76

    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)

    70 dB(A)

    With Cooling Fan Speed at Maximum Value - Note

    Distance of 15 m (49.2 ft), moving forward in second gear ratio.

    Transmission

    Forward - 1

    4.2 mile/h

    Forward - 2

    8.4 mile/h

    Forward - 3

    15 mile/h

    Forward - 4

    24.5 mile/h

    Note

    Maximum travel speed in standard vehicle with empty bucket and
    standard L3 tires with 849 mm (33 in) roll radius.

    Reverse - 1

    4.5 mile/h

    Reverse - 2

    9.2 mile/h

    Reverse - 3

    16.5 mile/h

    Reverse - 4

    24.5 mile/h

    Weights

    Operating Weight

    51,124 lb

    Note

    Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m³ (7.1 yd³) general purpose bucket with BOCE.

    • Operator Environment
      • Cab, pressurized, sound suppression
      • EH implement controls, parking brake
      • Steering, joystick
      • Seat, cloth, air suspension
      • Touchscreen display
      • Visibility: mirrors, rear-vision camera
      • Air conditioner, heater, defroster (auto temp, fan)
      • Sun visor, front, retractable
      • Sun visor, rear, retractable
      • Window cleaning platform, front
      • Window, front, laminated
    • ON-BOARD TECHNOLOGIES
      • Cat Payload scale
      • Autodig with Auto Set Tires
      • Operator ID & machine security
      • Application Profiles
      • Job Aids
      • Controls Help and eOMM
    • POWER TRAIN
      • Cat C9.3B engine
      • Electric fuel priming pump
      • Fuel-water separator and secondary fuel filter
      • Engine, air precleaner
      • Axles, front differential lock
      • Transmission, planetary, automatic powershift
      • Torque converter with lock-up
      • Service brakes, hydraulic, fully enclosed wet disc, wear indicators
      • Integrated Braking System (IBS)
      • Park brake, caliper on front axles, spring applied-pressure released
    • HYDRAULICS
      • Implement system, load sensing with variable displacement piston pump
      • Steering system, load sensing with dedicated variable displacement piston pump
      • Ride control, dual accumulators
      • Oil sampling valves, Cat XT™ hoses
    • ELECTRICAL
      • Starting and charging system, 24V
      • Starter, electric, heavy duty
      • Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rearvision lights
    • MONITORING SYSTEM
      • Front dash with analog gauges, LCD display, and warning lights
      • Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
    • LINKAGE
      • Standard lift, Z-bar
      • Kickouts: lift and tilt

    • Operator Environment
      • Door, remote opening system
      • HMU steering wheel
      • Entertainment radio (FM, AM, USB, BT)
      • Entertainment radio (DAB+)
      • CB radio ready
      • Seat, suede/cloth, air suspension, heated
      • Seat, leather/cloth, air suspension, heated/ cooled
      • Multiview (360�) vision system
      • Cat Detect rear radar system
      • Dedicated rearview screen
      • Mirrors, heated
      • Full cab window guard
    • ON-BOARD TECHNOLOGIES
      • Cat Advanced Payload
      • Cat Payload Printer
    • POWER TRAIN
      • Turbine, air precleaner
      • Radiator, high debris
      • Cooling fan, reversible
      • Axles, auto differential locks front and rear
      • Axles, ecology drains, AOC ready, extreme temperature seals
      • Axles, oil cooler
    • HYDRAULICS
      • 3rd and 4th auxiliary functions with ride control
      • Quick coupler control
    • ELECTRICAL
      • Cold start, 120V or 240V
      • Lights: LED
      • Warning beacon
    • MONITORING SYSTEM
      • Reversing strobe lights
    • LINKAGE
      • High lift, Z-bar
    • ADDITIONAL EQUIPMENT
      • Cat Autolube system
      • Fenders, extensions or roading
      • Guards: power train, crankcase, cab, cylinders, rear
      • Biodegradable hydraulic oil
      • High-speed oil change system
      • Rear cab access
      • Toolbox
      • Wheel chocks
      • Secondary steering system, electrical
    • SPECIAL CONFIGURATIONS
      • Aggregate handler
      • Waste and industrial
      • Forestry
      • Tunnelling
      • Corrosion resistant

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity