THIS IS MY SELECT

High Performance Propulsion and Maneuvering Solutions

C7.1 High Performance Propulsion Engine

Power Range

400 bhp - 500 bhp (298 bkW - 373 bkW)

Length - Engine

43.1 in

Engine Dry Weight - Approximate

1,676 lb

SPECIFICATIONS

The C7.1 marine propulsion engineis ideal for recreational boating applications, specifically smaller vessels and motoryachts ranging from 25 -60 feet in size. The engine features a common rail fuel system enabling optimum combustion and low emissions. The engines provide noticeably quiet operation due to reduced combustion noise through advanced electronic control. Additionally, no visible smoke is emitted from the C7.1 engines during operation.

    Dimensions & Weights

    Length - Engine

    43.1 in

    Engine Dry Weight - Approximate

    1,676 lb

    Height

    34.5 in

    Width - Engine

    31.4 in

    Engine Specifications

    Configuration

    In-line 6, 4-Stroke-Cycle Diesel

    Displacement

    428 in³

    Aspiration

    Turbocharged, aftercooled

    Stroke

    5.31 in

    Emissions

    IMO II, U.S. EPA Tier 3, RCD II, China II

    Bore

    4.13 in

    Speed Range

    2900 rpm

    Rotation from Flywheel End

    Counterclockwise

    Ratings

    Power Range

    400 bhp - 500 bhp (298 bkW - 373 bkW)

    • STANDARD EQUIPMENT
      • Water cooled turbocharger and exhaust manifold
      • Common rail fuel system
      • Corrosion resistant sea water aftercooler
      • Closed crankcase ventilation system
      • Starter motors - 12V or 24V
      • Fuel cooler
      • Integral engine oil cooler
      • Vibration damper and guard
      • Electric fuel priming pump
      • Self-tensioning multi-vee alternator drive belt
      • Gear driven sea water pump (rubber impeller)
      • Fin and tube type jacket water heat exchanger
      • Front and rear engine mounting brackets

    • OPTIONAL ATTACHEMENTS
      • Alternators - 24V 140 amp - 12V 175 amp
      • Transmission gear oil cooler (engine mounted)
      • Instrument Panels
      • Glow plugs
      • Jacket water heater
      • 6" water cooled exhaust elbow
      • Isolation mounts
      • Primary fuel filter/water separator (remote mount)
      • Selection of factory-fitted marine transmissions and oil hoses
      • Cabin heater (calorifier) connections
      • Triple groove PTO pulley (crankshaft mounted)
      • Flexible fuel hoses
      • Right-hand and high level left hand oil dipsticks

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN