THIS IS MY SELECT

Land Drilling Engines and Generator Sets

C15 ACERT Tier 4 Interim / EU Stage IIIB

Maximum Rating

580 BHP

Emissions

U.S. EPA Tier 4 Interim, EU Stage IIIB

Displacement

928 in³

SPECIFICATIONS

Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Interim or EU Stage IIIB emissions certifications in land mechanical drilling applications such as mud pump drives. Cat C15 ACERT™ Industrial Diesel Engine. Ratings: 354-433 bkW (475-580 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards.

    Capacity for Liquids

    Minimum Cooling System - Engine Only

    gal (US)

    Dimensions

    Length

    47.4 in

    Width

    36.7 in

    Height

    46.7 in

    Engine Specifications

    Maximum Rating

    580 BHP

    Emissions

    U.S. EPA Tier 4 Interim, EU Stage IIIB

    Displacement

    928 in³

    Minimum Rating

    475 BHP

    Bore

    5.4 in

    Stroke

    6.7 in

    Rated Speed

    2,100 r/min

    Aspiration

    Turbocharged-Aftercooled

    Governor and Protection

    ADEM A4

    Engine Weight - Net Dry

    2,976 lb

    Rotation from Flywheel End

    Counterclockwise

    Oil Change Interval

    250 - 500

    Flywheel and Flywheel Housing

    SAE No. 1

    Flywheel Teeth

    113

    • Air Inlet System
      • Turbocharged Air-to-Air Aftercooled
    • Control System
      • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
    • Cooling System
      • Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
    • Exhaust System
      • Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
    • Flywheels and Flywheel Housing
      • SAE 0 and SAE 1 flywheel housing
    • Fuel System
      • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
    • Lube System
      • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, shallow)
    • Power Take Off
      • SAE A, SAE B, SAE C drives available, engine power can also be taken from the front of the engine on some applications
    • General
      • Paint: Cat yellow; vibration damper; lifting eyes

    • Engine-Mounted Transmission Oil Cooler
      • integration with engine cooling system allows ease of installation and a tighter overall engine package
    • Engine Brakes
      • braking capabilities for mobile applications

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN