THIS IS MY SELECT

Maximum Rating

800 BHP

Emissions

U.S. EPA Non-road Tier 4 Final

Displacement

1,104 in³

SPECIFICATIONS

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat C18 ACERT™ Industrial Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.

    Capacity for Liquids

    Minimum Cooling System - Engine Only

    7.1 gal (US)

    Dimensions

    Length

    60.2 in

    Width

    37.8 in

    Height

    50.5 in

    Engine Specifications

    Maximum Rating

    800 BHP

    Emissions

    U.S. EPA Non-road Tier 4 Final

    Displacement

    1,104 in³

    Minimum Rating

    755 BHP

    Bore

    5.7 in

    Stroke

    7.2 in

    Rated Speed

    1,800 r/min

    Aspiration

    Turbocharged-Aftercooled

    Governor and Protection

    ADEM A4

    Engine Weight - Net Dry

    3,482 lb

    Rotation from Flywheel End

    Counterclockwise

    Oil Change Interval

    250 - 500

    Flywheel and Flywheel Housing

    SAE No. 0 or SAE No. 1

    Flywheel Teeth

    136 (SAE 0), 113 (SAE 1)

    • Air Inlet System
      • Turbocharged Aftercooled
    • Control System
      • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
    • Cooling System
      • Vertical outlet thermostat housing, centrifugal water pump
    • Exhaust System
      • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
    • Flywheels and Flywheel Housing
      • SAE 0 and SAE 1 flywheel housing
    • Fuel System
      • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
    • Lube System
      • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
    • Power Take Off
      • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
    • General
      • Paint: Cat yellow; vibration damper; lifting eyes

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN