THIS IS MY SELECT

Land Mechanical Engines

C15 ACERT Land Mechanical Drilling Engine

Minimum Rating

440 BHP

Maximum Rating

595 BHP

Emissions

93.0 hp

EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA

THIS IS MY SELECT

backhoe loader

C15 ACERT Land Mechanical Drilling Engine

Minimum Rating

440 BHP

Maximum Rating

595 BHP

Emissions

93.0 hp

EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA

Specifications

Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling applications such as mud pump drives. Cat C15 ACERT™ Industrial Diesel Engine. Ratings: 328-444 bkW (440-595 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards.

      • Minimum Rating

        440 BHP

        328 bkW

        Maximum Rating

        595 BHP

        444 bkW

        Emissions

        93.0 in

        93.0 mm

        EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA

        Rated Speed

        2,100 r/min

        1,800 r/min

        Bore

        5.4 in

        137.2 mm

        Stroke

        6.75 in

        171 mm

        Displacement

        928 in³

        15.2 l

        Aspiration

        93.0 in

        93.0 mm

        Turbocharged-Aftercooled

        Governor and Protection

        93.0 in

        93.0 mm

        ADEM A3

        Engine Weight - Net Dry

        2,743 lb

        1,245 kg

        Rotation from Flywheel End

        93.0 in

        93.0 mm

        Counterclockwise

        Oil Change Interval

        93.0 in

        93.0 mm

        250

        Flywheel and Flywheel Housing

        93.0 in

        93.0 mm

        SAE No. 0 or SAE No. 1

        Flywheel Teeth

        93.0 in

        93.0 mm

        136 (SAE 0), 113 (SAE 1)

      • Minimum Cooling System - Engine Only

        5.5 gal (US)

        20.8 l

      • Length

        54.2 in

        1,377 mm

        Width

        36.5 in

        927 mm

        Height

        48.3 in

        1,227 mm

      • Air Inlet System

      • Control System

        • Electronic governing, PTO speed control

        • Programmable ratings

        • Cold mode start strategy

        • Automatic altitude compensation

        • Power compensation for fuel temperature

        • Programmable low and high idle and TEL

        • Electronic diagnostics and fault logging

        • Engine monitoring and protection system (speed, temperature, pressure)

        • J1939 Broadcast (diagnostic, engine status, and control)

      • Cooling System

        • Thermostats and housing — outlet vertical

        • Jacket water pump — gear-driven, centrifugal, RH

        • RH front water pump inlet

        • All plugs/fittings are STOR for lines gp water

      • Exhaust System

        • Exhaust manifold — dry

        • Front turbo exhaust

        • Full marmon connection, maximum load 10 kg for direct connection to turbo

      • Flywheels and Flywheel Housings

      • Fuel System

        • MEUI system

        • Fuel filter, secondary, mid-mount (LH 2 micron high performance)

        • Fuel transfer pump, LH front

        • Fuel priming pump, LH mid-mount

        • Fuel sample valve, mounted on fuel filter base

      • Lube System

        • Crankcase breather — rear valve cover

        • Oil cooler — RH

        • Oil filter — RH

        • Oil pan — front sump

        • Oil filler — LH front

        • Oil dipstick — LH front

        • Oil pump

        • Oil valve sampling — on oil filter base

      • Mounting System

      • Power Take-Offs

        • Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width

        • Hydraulic pump drive, SAE A, 11 tooth

      • General

        • Vibration damper

        • Paint — Cat yellow

        • Lifting eyes

        • Automatic variable timing, electronic

        • Electronic installation kit 70-pin connector (connectors, pins, sockets)

        • Literature group owner and operator

      • Mandatory Options

        • Throttle position sensor

        • Exhaust system — front or rear

        • Flywheel housing or rear PTO

        • Primary filter/water separator

      • Transmission Arrangement

        • Transmission cooler

        • Tool set

      • Air Compressor

        • Air chambers

        • Air compressor governor

      • Air Inlet System

        • Air cleaners

        • Precleaners

        • Air lines

        • Air inlet gasket

      • Charging System

        • Charging alternators

        • Alternator mountings

        • Alternator wiring

        • Circuit breaker mountings

        • Alternator belt guard

      • Cooling System

        • Radiator — installed

        • Radiator — ship loose

        • Fan drive f/u/w Caterpillar installed radiator

        • Fan drives for customer-supplied radiators

        • Fan height instructions

        • Vee belts for customer-supplied radiators

        • Aftercooler lines f/u/w Caterpillar installed radiator

        • Rear-facing exhaust

        • Aftercooler lines

        • Suction fan adapters — attaches fan to fan pulley

        • Blower fan adapter — attaches fan to fan pulley

        • Blower fan

        • Suction fan

        • Fan belt tightener

        • Coolant level sensor

        • Dry charge coolant conditioners

        • Dry charge coolant conditioner element

      • Exhaust System

        • Turbo exhaust connection

        • Flexible fitting

        • Elbows

        • Flanges

        • Dry elbow

      Similar Models

      WHY CHOOSE EMPIRE

      • In-house, local project teams for design, engineering and management

      • Every purchase backed by a full menu of service and support offerings

      • Flexible financing options designed to fit your budget

      • Commitment to providing expert training to maximize operations

      • Value Agreements to ensure proper maintenance and performance

      YOU MIGHT ALSO BE INTERESTED IN