THIS IS MY SELECT

Industrial Diesel Engines

Cat® 3516 Industrial Diesel Engine

Maximum Power

2,000 HP

Maximum Torque

6,189 lb-ft @ 1400 rpm

Emissions

Non-Certified

SPECIFICATIONS

The Cat® 3516 Industrial Diesel Engine is offered in ratings ranging from 1011-1492 bkW (1355-2000 bhp) @ 1200-1800 rpm. These ratings are non-certified and are available for global non-regulated areas. Industries and applications powered by 3516 engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

    Emission Standards

    Emissions

    Non-Certified

    Engine Dimensions - Approximate

    Length

    133 in

    Width

    67 in

    Height

    68 in

    Weight - Net Dry - Basic Operating Engine Without Optional Attachments

    16,499 lb

    General

    Engine Configuration

    V-16, 4-Stroke-Cycle Diesel

    Bore

    6.7 in

    Stroke

    7.5 in

    Displacement

    4,210 in³

    Compression Ratio

    13.0:1

    Aspiration

    Turbocharged Aftercooled

    Rotation from Flywheel End

    Counterclockwise

    Aftertreatment

    -

    Power Rating

    Maximum Power

    2,000 HP

    Maximum Torque

    6,189 lb-ft @ 1400 rpm

    Rated Speed

    1200-1800 rpm

    Minimum Power

    1,355 HP

    • Air Inlet System
      • Aftercooler core, corrosion resistant coated (air side)
      • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
      • Turbocharger, rear mounted
      • Jacket water aftercooled
    • Control System
      • Governor, RH, 3161 with self contained synthetic oil sump
      • Air-fuel ratio control
      • Mechanical speed control, without torque control
      • Governor control
      • Positive locking
    • Cooling System
      • Thermostats and housing
      • Jacket water pump, centrifugal
    • Exhaust System
      • Exhaust manifold, dry
    • Flywheels and Flywheel Housing
      • SAE No. 00 flywheel
      • 183 flywheel teeth
      • SAE No. 00 flywheel housing
    • Fuel System
      • Fuel filter, with service indicators, cartridge type with RH service
      • Fuel transfer pump
    • Instrumentation
      • Instrument Panel, RH
      • Engine oil pressure gauge
      • Fuel pressure gauge
      • Oil filter differential gauge
      • Jacket water temperature gauge
      • Service meter, electric
      • Tachometer
    • Lube System
      • Crankcase breather, top mounted
      • Oil cooler
      • Oil filler
      • Oil dipstick
      • Oil pump
      • Oil filter, cartridge type with RH service
      • Shallow oil pan
    • Mounting System
      • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
    • Power Take Off
      • Accessory drive, upper RH
      • Front housing, single sided
    • Protection System
      • Junction box
      • Manual shutoff, RH
      • Safety shutoff protection, energized to shutdown
      • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
      • Water temperature
      • Overspeed
      • 3161 governor solenoid energized to shutdown
    • Starting System
      • Starting switch
    • General
      • Vibration damper
      • Lifting eyes
      • Paint: Caterpillar yellow, with optional colors available at request

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN