THIS IS MY SELECT

Industrial Diesel Engines

Cat® 3516C Industrial Diesel Engine

Maximum Power

2,100 HP

Maximum Torque

7,563 lb-ft @ 1300 rpm

Emissions

U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

SPECIFICATIONS

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

    Emission Standards

    Emissions

    U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

    Engine Dimensions - Approximate

    Length

    129.1 in

    Width

    60.2 in

    Height

    81.2 in

    Weight - Net Dry - Basic Operating Engine Without Optional Attachments

    17,284 lb

    General

    Engine Configuration

    V-16, 4-Stroke-Cycle Diesel

    Bore

    6.7 in

    Stroke

    8.5 in

    Displacement

    4,760 in³

    Compression Ratio

    14.7:1

    Aspiration

    Turbocharged Aftercooled

    Rotation from Flywheel End

    Counterclockwise

    Aftertreatment

    -

    Power Rating

    Maximum Power

    2,100 HP

    Maximum Torque

    7,563 lb-ft @ 1300 rpm

    Rated Speed

    1750 rpm

    Minimum Power

    2,100 HP

    • Air Inlet System
      • Air to Air Aftercooled (ATAAC)
      • Four turbochargers, center mounted
    • Control System
      • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
    • Cooling System
      • Thermostats and housing
      • Gear driven centrifugal jacket water pump
      • Connections for radiator cooling
    • Exhaust System
      • Exhaust manifold, dry
      • Four turbochargers with watercooled bearings
      • Two exhaust outlets, 203 mm (8 in) round flange
    • Flywheels and Flywheel Housing
      • SAE No. 00 flywheel (183 teeth)
      • SAE No. 00 flywheel housing
    • Fuel System
      • Fuel filter, LH spin-on type
      • Fuel transfer pump
      • Electronically controlled unit injectors
    • Instrumentation
      • No standard instrument or gauge panel
    • Lube System
      • Crankcase breather, top mounted
      • Oil cooler
      • Oil filler and dipstick, LH
      • Oil pump
      • Oil filter, LH, spin-on type
      • Front sump oil pan, 500-hour change interval
    • Mounting System
      • Trunnion front support
    • Power Take Off
      • Front housing, two-sided
    • Protection System
      • ADEM A4 ECM monitoring system to provide customer programmable engine
      • Deration strategies to protect against adverse operating conditions
      • Emergency stop logic inputs provided at 40 pin customer interface connection
    • Starting System
      • Dual 24V electric starting motor, LH, unwired
    • General
      • Paint: Caterpillar yellow
      • Vibration damper
      • Lifting eyes

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN