THIS IS MY SELECT

Industrial Diesel Engines

Cat?� C1.1 Diesel Engine

Maximum Power

23.8 hp

Maximum Torque

60.7 lb-ft @ 1600 rpm

Emissions

U.S. EPA Tier 4 Final

SPECIFICATIONS

The Cat® C1.1 Industrial Diesel Engine is offered in ratings ranging from 14.4-18.4 bkW (19.3-24.7 bhp) @ 1800-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Underground Mining Equipment.

    Emission Standards

    Emissions

    U.S. EPA Tier 4 Final

    Engine Dimensions - Approximate

    Length

    19.6 in

    Width

    20.1 in

    Height

    23.1 in

    Weight - Net Dry - Basic Operating Engine Without Optional Attachments

    238 lb

    General

    Engine Configuration

    In-Line 3

    Bore

    in

    Stroke

    3.2 in

    Displacement

    69 in³

    Compression Ratio

    22.1:1

    Aspiration

    Naturally Aspirated (NA)/Turbocharged (T)

    Combustion System

    Indirect Injection

    Rotation from Flywheel End

    Counterclockwise

    Aftertreatment

    -

    Total Lubricating Oil Capacity

    1.16 gal (US)

    Power Rating

    Maximum Power

    23.8 hp

    Maximum Torque

    60.7 lb-ft @ 1600 rpm

    Rated Speed

    2800 rpm

    Minimum Power

    23.8 hp

    • Air Inlet System
      • Inlet manifold with choice of inlets.
    • Control System
      • Alternator 12 volt 65 amp
      • Starter motor 12 volt
      • Glow plug starting aid
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
    • Flywheel and Flywheel Housing
      • SAE No. 6 1/2 flywheel
      • Choice of SAE No. 5 or standard backplate flywheel housing
      • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
    • Lube System
      • Low profile oil pan
      • Spin-on lube oil filter
      • Lube oil pressure switch
    • Power Take Off (PTO)
      • Provision for Power Take Off (PTO)
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Paint: Caterpillar yellow, with optional colors available at request

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN