THIS IS MY SELECT

Industrial Diesel Engines

C1.1 NA and T EU Stage V

Maximum Power

24.6 hp

Maximum Torque

63.4 lb-ft @ 1600 rpm

Emissions

EU Stage V

SPECIFICATIONS

The C1.1 and C1.1T are indirect injection industrial diesel engines meeting EU Stage V emission standards without the need for electronic control, aftertreatment or exhaust gas recirculation. Available as naturally aspirated or turbocharged for improved low speed torque, we also offer a range of factory configurable options to minimize the cost of machine development and of manufacturing if equipped with e-controller

    Emission Standards

    Emissions

    EU Stage V

    Engine Dimensions - Approximate

    Length

    19.6 in

    Width

    20.1 in

    Height

    23.1 in

    Weight - Net Dry - Basic Operating Engine Without Optional Attachments

    238 lb

    General

    Engine Configuration

    In-line-3

    Bore

    in

    Stroke

    3.2 in

    Displacement

    67.1 in³

    Compression Ratio

    22.1:1

    Aspiration

    Naturally Aspirated (NA)/Turbocharged (T)

    Combustion System

    indirect injection

    Rotation from Flywheel End

    counterclockwise

    Total Lubricating Oil Capacity

    1.16 gal (US)

    Power Rating

    Maximum Power

    24.6 hp

    Maximum Torque

    63.4 lb-ft @ 1600 rpm

    Rated Speed

    2800 rpm

    Minimum Power

    24.6 hp

    • Air inlet system
      • Inlet manifold with choice of inlets
    • Air Inlet System
      • Inlet manifold with choice of inlets.
    • Control System
      • Alternator 12 volt 65 amp
      • Starter motor 12 volt
      • Glow plug starting aid
    • Cooling System
      • Belt-driven coolant pump
      • Coolant temperature switch
    • Flywheel and Flywheel Housing
      • SAE No. 6 1/2 flywheel
      • Choice of SAE No. 5 or standard backplate flywheel housing
      • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
    • Fuel System
      • Fuel injection pump
      • Spin-on fuel filter
    • Lube System
      • Low profile oil pan
      • Spin-on lube oil filter
      • Lube oil pressure switch
    • Power Take Off (PTO)
      • Provision for Power Take Off (PTO)
    • General
      • Cast iron, engine block
      • Cast iron exhaust manifold--side outlet
      • Cold start capability to -20° C (-4° F)
      • Paint: Caterpillar yellow, with optional colors available at request

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN