THIS IS MY SELECT

Industrial Diesel Engines

Cat® C18 Industrial Diesel Engine

Maximum Power

800 HP

Maximum Torque

2,696 lb-ft @ 1400 rpm

Emissions

China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified

SPECIFICATIONS

The Cat® C18 Industrial Diesel Engine is offered in ratings ranging from 429-522 bkW (575-700 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Ratings: 571-597 bkW (765-800 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards. Non-certified ratings are also available at 429-522 bkW (575-700 bhp) @ 1800-2100. Industries and applications powered by C18 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers, Grinders, Compactors, Rollers, Compressors, Construction, Cranes, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

    Emission Standards

    Emissions

    China Nonroad III, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent, or Non-certified

    Engine Dimensions - Approximate

    Length

    55.7 in

    Width

    38.3 in

    Height

    49.5 in

    Weight - Net Dry - Basic Operating Engine Without Optional Attachments

    3,688 lb

    General

    Engine Configuration

    Inline 6, 4-Stroke-Cycle Diesel

    Bore

    5.7 in

    Stroke

    7.2 in

    Displacement

    1,104.5 in³

    Compression Ratio

    16.3:1

    Aspiration

    Turbocharged Aftercooled (TA)

    Combustion System

    Direct Injection

    Rotation from Flywheel End

    Counterclockwise

    Aftertreatment

    -

    Power Rating

    Maximum Power

    800 HP

    Maximum Torque

    2,696 lb-ft @ 1400 rpm

    Rated Speed

    1800-2100 rpm

    Minimum Power

    575 HP

    • Air Inlet System
      • Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
      • Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
      • Air-to-Air Aftercooled
    • Charging System
      • Charging alternator 24 volt, 50 amp
    • Control System
      • Electronic governing, PTO speed control
      • Programmable ratings
      • Automatic altitude compensation
      • Power compensation for fuel temperature
      • Programmable low and high idle and total engine limit
      • Electronic diagnostics and fault logging
      • Engine monitoring system SAE J1939 broadcast and control
      • ADEM™ A4 Electronic Control Unit (ECU)
    • Cooling System
      • Thermostats and housing, vertical outlet
      • Jacket water pump, centrifugal
      • Water pump, inlet
    • Exhaust System
      • Exhaust manifold, dry
      • Optional exhaust outlet
    • Flywheels and Flywheel Housing
      • SAE No. 1 or SAE No. 0 flywheel housing
    • Fuel System
      • MEUI injection
      • Fuel filter, secondary (2 micron)
      • Fuel filter, tertiary (2 micron)
      • ACERT™ Technology
      • Fuel transfer pump
      • Fuel priming pump
    • Lube System
      • Crankcase breather
      • Oil cooler
      • Oil filler
      • Lube oil filter
      • Front sump oil pan
      • Oil dipstick
      • Gear driven oil pump
    • General
      • Vibration damper
      • Lifting eyes
      • Cold start capability to -20° C (-4° F)
      • Paint: Caterpillar yellow, with optional colors available at request

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN