THIS IS MY SELECT

Auxiliary Engines

C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

Length

43.1 in

Power Range

208 bkW (280 bhp) @ 2300 rpm

Height

35.1 in

SPECIFICATIONS

C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

    Dimensions & Weights

    Length

    43.1 in

    Height

    35.1 in

    Minimum Width

    31.4 in

    Maximum Width

    33.5 in

    Minimum Engine Dry Weight

    1,609 lb

    Maximum Engine Dry Weight

    1,676 lb

    Engine Specifications

    Configuration

    In-line 6, 4-stroke-cycle diesel

    Emissions

    U.S. EPA Tier 3 / IMO II
    emissions certified (commercial),
    RCD 2016 compliant, EU Stage IIIA
    compliant, CCNR Stage II through
    reciprocity with EU Stage IIIA

    Rated Engine Speed

    2300 rpm

    Bore

    4.13 in

    Stroke

    5.31 in

    Displacement

    428 in³

    Aspiration

    Turbocharged-aftercooled
    aspiration

    Governor

    Electronic (A5E2 V2 ECM)

    Refill Capacity

    Lube Oil System w/Oil filter change:
    20 L (5.3 gal)

    Oil Change Interval

    500 hrs

    Cooling

    Heat exchanger or keel cooled

    Flywheel Housing

    SAE No. 03 with SAE
    11.5 in flywheel

    Rotation

    Counterclockwise from flywheel end

    Power Rating

    Power Range

    208 bkW (280 bhp) @ 2300 rpm

    • COOLING SYSTEM
      • Gear driven jacket water pump
      • Corrosion resistant sea water aftercooler
      • Fuel cooler
    • EXHAUST SYSTEM
      • Watercooled turbocharger and exhaust manifold
    • FUEL SYSTEM
      • Common rail fuel system
      • Electric fuel priming pump
    • GENERAL
      • Vibration damper and guard
      • Self-tensioning multi-vee belt drive
    • LUBE SYSTEM
      • Closed crankcase ventilation system
      • Integral engine oil cooler
    • MOUNTING SYSTEM
      • Front and rear engine mounting brackets
    • STARTING SYSTEM
      • Starter motors - 12V or 24V

    • AIR INLET SYSTEM
      • Various 6" water cooled exhaust elbow configurations
    • COOLING SYSTEM
      • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
      • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
      • Jacket water heater
      • Cabin heater (calorifier) connections
    • FUEL SYSTEM
      • SOLAS double wall high pressure fuel lines kit
    • LUBE SYSTEM
      • Left-hand and right-hand oil dipsticks
      • Transmission gear oil cooler (engine mounted)
    • PROTECTION SYSTEM
      • Additional engine and transmission sensor packages for on or off vessel monitoring
    • STARTING SYSTEM
      • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
      • Glow plugs

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN