THIS IS MY SELECT
C18 Marine Generator Set
Minimum Rating
260 ekW (325 kVA)
Maximum Rating
565 ekW (706 kVA)
Frequency
50 hz
SPECIFICATIONS
The C18 is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.
Engine Specifications
Configuration
In-line 6, 4-Stroke-Cycle Diesel
Aspiration
Turbocharged - aftercooled
Bore
5.7 in
145 mm
Stroke
7.2 in
183 mm
Fuel System
MEUI
Generator Set Configurations
Emissions
EPA Tier 3, IMO II, EU IW
Generator Set Dimensions - Keel and Hex Cooled
Height
64.9 in
1,648 mm
Length
119.6 in
3,038 mm
Width
55.6 in
1,411 mm
Weight - Approximate
9,747 lb
4,221 kg
Generator Set Dimensions - Radiator Cooled
Weight - Approximate
13,396 lb
6,076 kg
Width
66.9 in
1,699 mm
Height
94.8 in
2,408 mm
Length
55.6 in
4,741 mm
Generator Set Specifications
Minimum Rating
260 ekW (325 kVA)
Maximum Rating
565 ekW (706 kVA)
Frequency
50 hz
Speed
50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Generator Specifications
Excitation
SRMP
Insulation
Class H
IP Rating
IP23 (standard), IP 44 (optional)
Voltage Regulator
CDVR (Digital Voltage)
- Air inlet system
- Separate circuit after-cooled (SCAC)
- Heavy-duty inlet air filter
- Cooling system
- SCAC pump, gear driven, for HEX cooled engines only
- Jacket water pump, gear driven
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
- Exhaust system
- Water-cooled exhaust manifold & turbocharger
- Round flanged exhaust outlet
- Fuel system
- Hybrid fuel lines
- MEUI™ fuel system
- Fuel filter, front service
- Fuel transfer and priming pumps
- Lube system
- Center sump oil pan, deep
- Front and top service oil filler locations
- Front service dipstick
- Mounting system
- Vibration Isolators
- Formed C-channel rails
- Control system
- Electronic fuel/air ratio control
- SRMP permanent magnet 12-lead generator
- Digital voltage regulator
- Class H insulation, Class F temperature rise, IP23 protection
- Exhaust system
- Dry Elbows
- Water-Cooled Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler, Spark Arresting
- Fumes disposal (closed system)
- Air inlet system
- Air Inlet Adapter
- Charging system
- Battery Chargers 10 amp
- Battery sets: 24V 950-1300 CCA
- Charging alternator 24V 105 amp
- Control system
- Caterpillar alarm and protection
- EMCP 4.2 control panel
- MGCP III B control panel
- Fuel system
- Duplex fuel filter – front service
- Fuel cooler
- Primary fuel/water separator
- Instrumentation
- Generator service side - LH, RH
- Generator terminal box extension
- Load sharing module (option for type approved module)
- Lube system
- Spare pump kits
- Duplex oil filter – front service
- Manual sump pump
- Mounting system
- Vibration Isolators
- Protection system
- Generator protection - IP44
- Starting system
- Starting motors - electric and/or air
- Jacket water heaters
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity