THIS IS MY SELECT

C7.1

Power Range

100 - 200 ekW

Frequency

50 / 60

Emissions

IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II

Browse Rental Power Systems Search Used Power Systems

REQUEST A QUOTE

Download Product Brochure

Document 1

View Current Deals

SPECIFICATIONS

C7.1

FULL SPECIFICATIONS

Engine Specifications

Emissions

IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II

Configuration

Inline 6, 4-Stroke Cycle Diesel

Displacement

428 in³

Aspiration

Turbocharged / Aftercooled

Governor

Electronic (A5 ECM)

Bore

4.13 in

Stroke

5.31 in

Refill Capacity

Lube Oil System w/oil filter change: 21 L / 5.6 gal

Oil Change Interval

500 hrs

Rotation from Flywheel End

Counterclockwise

Cooling

Heat exchanger, Seperate Circuit Keel Cooled, Combined Circuit Keel Cooled, Radiator Cooled

Generator Set Dimensions

Length

76.3 in /1,940 mm

Height

49.7 in / 1,263 mm

Engine Dry Weight

3355 lb / 1,522 kg

Generator Set Dimensions and Weights - Dependent on Generator Type

Width

38.0 in / 965 mm

Generator Set Specifications

Frequency

50 / 60

Speed

1500 rpm / 1800 rpm

Power Rating

Power Range

100 - 200 ekW

STANDARD EQUIPMENT

Mounting System
- Front and rear engine mounting brackets
Exhaust System
- Watercooled turbocharger and exhaust manifold
Fuel System
- Common Rail fuel system
- Electric fuel priming pump
General
- Self-tensioning multi-vee belt drive
- Vibration damper and guard
Lube System
- Open crankcase ventilation system
- Integral engine oil cooler
Starting System
- 12 V or 24 V starter motor
Cooling System
- Gear-driven jacket-water pump
- Corrosion resistant sea water aftercooler
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Fuel cooler

OPTIONAL EQUIPMENT

Lube System
- Transmission gear oil cooler (engine mounted)
- Left-hand and right-hand oil dipsticks
Fuel System
- SOLAS double wall high pressure fuel lines kit
General
- Glow plugs
Protection System
- Additional engine and transmission sensor packages for on or off vessel monitoring
Cooling System
- Cabin heater (calorifier) connections
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Jacket water heater
Air Inlet System
- Various 6" water cooled exhaust elbow configurations
Starting System
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp