THIS IS MY SELECT

Marine Generator Sets

C7.1 (Electronic Control System)

Speed

100 ekW (125 kVA)– 150 ekW (187.5 kVA) @ 1500 RPM 118 ekW (147.5 kVA) – 200 ekW (250 kVA) @ 1800 RPM

Frequency

50 Hz or 60 Hz

Emissions

IMO II, IMO III (SCR required) U.S. EPA Tier 4, EU Stage V, China II

SPECIFICATIONS

C7.1 (Electronic Control System)

    Engine Specifications

    Emissions

    IMO II, IMO III (SCR required) U.S. EPA Tier 4, EU Stage V, China II

    Engine Model

    In-line 6, 4-Stroke-Cycle Diesel

    Aspiration

    TA

    Bore

    4.13 in

    Stroke

    5.31 in

    Displacement

    428 in³

    Governor Type

    Electronic (ADEM VI)

    Fuel System

    Common Rail Fuel System

    Generator Set Dimensions

    Width

    37.6 in

    Height

    49.7 in

    Weight

    1652 -1840 kg, 3634-4026 lb

    Length

    76.2 in/1935 mm (minimum), 83.3 in/2116 mm (maximum)

    Generator Set Specifications

    Speed

    100 ekW (125 kVA)– 150 ekW (187.5 kVA) @ 1500 RPM 118 ekW (147.5 kVA) – 200 ekW (250 kVA) @ 1800 RPM

    Frequency

    50 Hz or 60 Hz

    Minimum Rating

    100 ekW (125 kVA)

    Maximum Rating

    200 ekW (250 kVA)

    Generator Specifications

    Pitch

    2/3

    Number of Leads

    12

    Insulation

    Class H

    IP Rating

    IP23 Water protection

    Voltage Regulator

    Solid state

    • AIR INLET SYSTEM
      • Open Crankcase Ventilation (OCV) system
      • Turbocharger, jacket water cooled
      • Integrated coolant lines into manifold utilizing EGR circuit
    • CONTROL SYSTEM
      • Panels available in RH, LH, and rear configurations with a remote mount option
      • Electronic diagnostics and fault logging
      • Electronic governor
      • Electronic Control Module (ECM)
      • SAE J1939 data link Ratings Only
      • Electronic fuel/air ratio control
    • COOLING SYSTEM
      • Integrated heat exchanger and aftercooler
      • Compact design integral coolant passages
      • Thermostat and housing
      • Jacket Water Heater 120/240V option
      • Auxiliary seawater pump, gear driven
      • Engine mounted heat exchanger, removable tubeBundle (for sea water) (heat exchanger engines only)
      • Engine oil cooler
      • Auxiliary sea water lines
      • Keel cooling
    • EXHAUST SYSTEM
      • Water-cooled exhaust manifold & turbocharger
      • 152 mm (6 in) round flanged outlet
      • Dry Elbow/Flange options
    • FLYWHEELS & FLYWHEEL HOUSINGS
      • Flywheel Housing, SAE No. 2
      • Flywheel, 134 teeth
      • SAE standard rotation
    • FUEL SYSTEM
      • Common Rail Fuel System
      • Simplex and Duplex Fuel options
      • Flexible fuel line option
      • Fuel transfer pump, gear driven
    • GENERATORS AND GENERATOR ATTACHMENTS
      • 12 leads
      • 3 phase Brushless
      • Separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds
      • 2/3 Pitch
      • Broad voltage band
      • IP23 Water protection
      • Solid state voltage regulator with integral voltage adjustment
      • Class H insulation
      • Generator temperature rise exceeds marine society requirements for 105 C @ 50 C ambient - prime 85 C @ 50 C ambient - prime Connection poles
    • LUBE SYSTEM
      • Crankcase breather
      • Simplex and Duplex options
      • Oil filter, RH service
      • Oil filler, in valve cover and timing case (option)
      • Oil level gauge, RH service
      • Oil pan
      • Oil pan drain, RH`
      • Lubricating oil
      • Engine oil pump (gear driven)
    • MOUNTING SYSTEM
      • Skiddable base frame
      • Anti vibration isolators between base and engine-generator
    • POWER TAKE-OFFS
      • Poly-V groove for alternator drive
      • PTO Shaft Kit (optional)
    • GENERAL
      • Torsional vibration damper and guard
      • Paint, Caterpillar yellow
      • Lifting eyes
      • Protective lifting covers
      • Literature
      • Battery disconnect switch
      • Plastic wrap packaging
      • Note: Keel-cooled gen sets do not include the keel cooler(s).
      • Engine is certified to D2/E2 emissions cycles

    • CONTROL SYSTEM
      • Governor droop kit
    • EXHAUST SYSTEM
      • Dry Elbow
      • Dry Flange
      • Exhaust Temp Sensor
    • FUEL SYSTEM
      • Flexible Fuel Lines
    • LUBE SYSTEM
      • Dipstick
    • COOLING SYSTEM
      • Coolant recovery tank
      • Jacket Water Heater
    • POWER TAKE-OFFS
      • Crankshaft Pulley

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN