THIS IS MY SELECT
3612 Generator Set (Medium Speed)
Maximum Rating
4000 ekW
Minimum Rating
3300 ekW
Emissions/Fuel Strategy
Low Fuel Consumption
SPECIFICATIONS
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Engine Specifications
Engine Model
3612 V-12,4-Stroke Water-Cooled Diesel
Bore
11 in
280 mm
Stroke
11.8 in
300 mm
Displacement
13,524 in³
222 l
Compression Ratio
13:01
Aspiration
TA
Fuel System
Direct unit injection
Governor Type
Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum
404 in
10,261.7 mm
Width - Maximum
99.62 in
2,530.3 mm
Height - Maximum
156.6 in
3,977.7 mm
Dry Weight - Genset (maximum)
112,690 lb
51,230 kg
Generator Set Specifications
Maximum Rating
4000 ekW
Minimum Rating
3300 ekW
Emissions/Fuel Strategy
Low Fuel Consumption
Frequency
60 Hz
Speed
720 & 900 rpm
Duty Cycle
Prime, Continuous
- Air Inlet System
- Turbocharger, watercooled, engine oil lubricated
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
- Breather, crankcase, top-mounted
- Air inlet shutoff
- Cooling System
- Jacket water thermostats
- Engine coolant water drains
- Water temperature regulator
- Three-bundle oil cooler
- Front mounted turbos
- Exhaust System
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Fuel System
- Simplex or duplex
- Generator System
- Custom generator per generator data sheet completed by Dealer
- Governor System
- UG Actuator
- Lube System
- Oil pressure regulating valve
- Oil filler and dipstick
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Crankcase explosion relief valves
- Mounting System
- Engine and generator mounting
- Damper, torsional vibration
- Starting / Charging System
- Vane type air starter
- Air silencer
- Line group for single point custom connection
- Two motors, engine mounted at rear, on left side
- General:
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
- Air Inlet System
- Boost control valve
- Air inlet adapter
- Soot filter
- Vertical support bracket
- Air cleaner louver assembly
- Heavy duty air cleaner
- Cooling System
- Heat exchanger for single circuit
- Heating aids
- Cooling system aids
- Expansion tank
- Auxiliary water pump
- Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
- Fuel System
- Fuel system connections
- Fuel priming pump
- Duplex primary fuel strainer
- Generator System
- Busbar connections
- Anti-condensation space heaters
- Class F insulation
- Winding temperature detectors
- 3 Phase, six leads, WYE
- Governor System
- 723 Plus
- Digital programmers
- Electronic/actuators
- Battery backup/power supply
- 230 UA
- EGB actuator
- Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
- Mounting System
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Isolator
- Starting / Charging System
- Redundant air starters
- Turbine type air starters
- Pressure reducing valve
- Compressed air flex hose
- General:
- Custom paint colors
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity