THIS IS MY SELECT

Diesel Generator Sets

C175-16 Generator Set

Maximum Rating

3365 ekW

Minimum Rating

2500 ekW

Emissions/Fuel Strategy

Low Fuel, Tier 2
Browse Rental Power Systems Search Used Power Systems
REQUEST A QUOTE
Download Product Brochure
    Download Product Brochure
    Document 1
    View current deal tags

    View Current Deals

    SPECIFICATIONS

    Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

      FULL SPECIFICATIONS

      Engine Specifications

      Engine Model

      C175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel

      Bore

      6.89 in

      Stroke

      8.66 in

      Displacement

      6,456.31 in³

      Compression Ratio

      16.7:1

      Aspiration

      Turbo Aftercooled

      Fuel System

      Common Rail

      Governor Type

      ADEM� A4

      Generator Set Dimensions

      Length - Minimum

      250.9 in

      Length - Maximum

      330.6 in

      Width - Minimum

      82.7 in

      Width - Maximum

      124.3 in

      Height - Minimum

      86.9 in

      Height - Maximum

      134.2 in

      Dry Weight - Genset (minimum)

      42,750 lb

      Dry Weight - Genset (maximum)

      57,774 lb

      Generator Set Specifications

      Maximum Rating

      3365 ekW

      Minimum Rating

      2500 ekW

      Emissions/Fuel Strategy

      Low Fuel, Tier 2

      Voltage

      480 to 13800 Volts

      Frequency

      60 Hz

      Speed

      1800 RPM

      Duty Cycle

      Standby, Mission Critical, Prime, Continuous

      Standby Rating

      3365(no fan)/3250/3100(no fan)/3000 ekW

      Prime Power Rating

      3115(no fan)/3000/2825(no fan)/2725 ekW
      STANDARD EQUIPMENT

      • Air Inlet System
        • 4 x Single element canister with service indicator(s).
      • Control Panel
        • 2 Programmable relay outputs (Form C)
        • Low coolant level
        • Over/under voltage
        • Coolant temperature
        • Serial annunciator module data link
        • Alarm acknowledge
        • Text alarm/event descriptions
        • Volts (L-L & L-N)
        • Reverse power
        • Over/under frequency
        • Environmental sealed front face
        • Programmable protective relaying functions
        • Speed adjust
        • Generator phase sequence
        • Low coolant temperature
        • Generator mounted - rear facing
        • Overspeed
        • Controls
        • Frequency (Hz)
        • Engine cycle crank
        • Engine cool-down timer
        • Warning/shutdown Indicators:
        • Lamp test
        • 2 Programmable digital outputs
        • 6 Programmable digital inputs
        • High coolant temperature
        • Customer data link (Modbus RTU)
        • Auto/start/stop control
        • Emergency stop pushbutton
        • RPM
        • Digital Indicators
        • Communications
        • Accessory module data link
        • Oil pressure (psi, kPa or bar)
        • Low oil pressure
        • Overcurrent
        • Emergency stop
        • 24 Volt DC operation
        • 4 Programmable relay outputs (Form A)
        • Failure to start (overcrank)
        • True RMS AC metering, 3-phase, +/-2% accuracy
        • Power factor (per phase & average)
        • Operating hours
        • DC volts
        • Amps (per phase & average)
        • Cat ECS 100
        • Reverse reactive power
      • Exhaust System
        • Bolted flange, with bellow for each turbo
        • Exhaust flange outlet
      • Fuel System
        • Engine mounted filters #REF!
        • Filters x 3
        • 10 Micron spin on yype
        • Secondary/tertiary fuel filters
        • 4 Micron spin on type
        • Primary fuel filter water/fuel water separator
      • Generators and Attachments
        • Right side extension box, bottom cable entry
        • IEC platinum stator RTDs
        • Reactive droop capability
        • 3 Phase voltage sensing
        • (MV) Busbar connections, right side extension box, bottom cable entry
        • Class F temperature rise at 40C ambient
        • Anti-condensation space heater
        • NEMA Class H insulation
        • 6 Leads
        • Class H temperature rise at 40C ambient
        • Voltage regulator
        • Exciter diode monitor
        • Form wound
        • RFI suppression
        • (LV) Busbar connections, top/center mounted, top cable entry
        • 3 Phase brushless
        • 60 Hz models: NEMA standard hole pattern
        • Permanent magnet excitation (PMG)
        • Min / max exciter limiter
        • Salient pole
      • Governing System
        • Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
        • ADEM A4
      • Lube System
        • Oil filter, filler and dipstick
        • Integral lube Oil cooler
        • Oil drain lines and valve
        • Fumes disposal
        • Lubricating oil
        • Prelube - required with prime, continuous, and standby
        • Gear type lube oil pump
      • Mounting Systems
        • Rails - Engine/generator
        • Rubber anti-vibration mounts - shipped loose
        • Dual 24 volt electric starting motors
        • Battery disconnect switch
        • Batteries and battery rack w/cables
      • Power Termination
        • Busbar
      • Service Instructions
        • Two PM inspections
      • General
        • Paint - Caterpillar yellow with high gloss black rails & radiator
        • SAE standard rotation
        • LH Service
        • Flywheel and flywheel housing-SAE No. 00

      OPTIONAL EQUIPMENT

      • Air Inlet System
        • Air inlet adapters
        • Dual element air cleaner
        • Single element air cleaner
        • Air inlet protection
      • Control Panel
        • Package mounted radiator
        • Automatically selected ground
        • Customer AC-DC connection mounting location - LV/MV
        • Load share governor
        • EMCP 4.4
        • E-Stop
        • Frame boxes
        • Annunciator modules
        • Load share module / auxiliary plate and auxiliary box (LV)
        • Fuel cooler
        • Controller mounting location - LV/MV
        • Modbus monitoring of packages
        • Customer interface options
        • EMCP 4.4 optional harness
        • Controller voltage and current sensing groups
        • Remote radiators
        • Generator harness
        • Interconnect harness
        • Speed adjust
        • Controller and MV and HV power connection locations
        • Raise lower switch
      • Crankcase Systems
        • Explosive relief valves
        • Crankcase ventilation system
      • Exhaust System
        • Mufflers
        • Exhaust support group
        • Weld flanges
        • Exhaust collectors/manifold
        • Front housing - Prime or continuous
        • Front housing - Standby or mission critical
        • Aftercooler drain
      • Fuel System
        • Primary fuel filter
      • Generators and Attachments
        • Low voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
        • Medium voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
        • Conversion GP - Top cable entry
        • Low voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
        • Differential current transformers
        • Space heater kit
        • Medium voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
        • Thermostat for space heater
        • Generator air intake
      • Instrumentation
        • Pyrometer and thermocouples
      • Lube System
        • Drain group oil pans
        • Oil filters
        • Lube oil heater
        • Electric prelube pumps
        • Lubricating oil
      • Mounting Systems
        • IBC vibration isolators - Shipped loose
        • Spring type linear vibration isolators
        • Rubber anti-vibration mounts
      • Power Connections
        • Low voltage connection cable
        • Center post busbarss (LV)
        • 1800 Frame generator side / rear mounted busbars (MV)
        • Enclosures - Control packaging (LV)
        • Paralleling circuit breakers
        • 1800 Frame generators Circuit breaker
        • Neutral ground (LV)
        • Neutral ground (MV)
        • Cable entry options (LV)
        • Cable entry options (MV)
        • Masterpack breakers
        • Power connection covers (LV)
        • Harnesses (Breaker)
        • Masterpack breaker connections
        • Side/rear mounted busbars (LV)
      • Special Tests / Reports
        • IBC seismic Certification
        • Special test charge - Engine only
        • PGS Test report @ 0.8 power factor
        • Genset fuel consumption test
        • Standard genset TVA (Torsional Vibration Analysis) report
        • PGS Test report @ 1.0 power factor
        • OSCOSH1 seismic Certification
        • Custom generator TVA report
        • Generator test report
        • Standard engine test charge
      • Starting / Charging System
        • Heavy duty battery sets with rack
        • Charging alternators - Dry
        • Air pressure regulator
        • Starter location covers
        • 24 Volt power distribution box
        • 24 Volt electric starting motor
        • 35 Amp Battery chargers
        • 24 Volt battery set - Dry
        • 20 Amp Battery chargers
        • Jacket water heaters
        • 50 Amp Battery chargers
        • Air starting motor
        • Jacket water heater wiring groups
      • General
        • Special paint colors
        • Control GP - air powered bar group
        • Barring group manual
        • Service tools - Engine barring group
        • Engine barring air powered

      Related Attachments

      Similar Models

      WHY CHOOSE EMPIRE

      • Machines built tough and ready to run in rugged applications

      • Trusted advisors to help you find and maximize your equipment

      • Wide inventory of rental equipment that lets you try before you buy

      • Full service and support to ensure performance and longevity

      YOU MIGHT ALSO BE INTERESTED IN

      VALUE AGREEMENTS

      SERVICE

      TRAINING