THIS IS MY SELECT

Diesel Generator Sets

C175-16 Tier 4 Final

Maximum Rating

3100 ekW

Minimum Rating

2500 ekW

Emissions/Fuel Strategy

U.S. EPA Certified Tier 4

SPECIFICATIONS

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

    Engine Specifications

    Engine Model

    C175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel

    Bore

    6.89 in

    Stroke

    8.66 in

    Displacement

    5,155.88 in³

    Compression Ratio

    16.7:1

    Aspiration

    Turbo Aftercooled

    Fuel System

    EUI

    Governor Type

    ADEM� A4

    Generator Set Dimensions

    Length - Minimum

    242.77 in

    Length - Maximum

    312.2 in

    Width - Minimum

    83.1 in

    Width - Maximum

    123 in

    Height - Minimum

    87 in

    Height - Maximum

    142.3 in

    Dry Weight - Genset (minimum)

    42,750 lb

    Dry Weight - Genset (maximum)

    45,114 lb

    Generator Set Specifications

    Maximum Rating

    3100 ekW

    Minimum Rating

    2500 ekW

    Emissions/Fuel Strategy

    U.S. EPA Certified Tier 4

    Voltage

    480 to 13800 Volts

    Frequency

    60 Hz

    Speed

    1800 rpm

    Duty Cycle

    Standby, Mission Critical, Prime, Continuous

    Standby Rating

    3100(no fan)/3000 ekW

    Prime Power Rating

    2825(no fan)/2725 ekW

    • Control Panel
      • - Warning/shutdown with common LED indication of shutdowns with indicating lights for:
      • #NAME?
      • Environmental sealed front face
      • #NAME?
      • Lamp test
      • #NAME?
      • Generator mounted - rear facing
      • - Volts (L-L & L-N)
      • - Amps (per phase & average)
      • #NAME?
      • Auto / start / stop control
      • 24 Volt DC operation
      • #NAME?
      • - Overcurrent (50/51)
      • Local annunciator option
      • #NAME?
      • Overspeed
      • #NAME?
      • #NAME?
      • 12 Programmable digital inputs
      • kW (per phase, average & percent)
      • #NAME?
      • True RMS AC metering, 3-phase, +/-0.25% accuracy
      • #NAME?
      • DC volts
      • Low coolant level Over / Under voltage (27/59)
      • #NAME?
      • Controls:
      • #NAME?
      • Amps (per phase & average)
      • #NAME?
      • #NAME?
      • kVAr (per phase, average & percent)
      • - kVA (per phase, average & percent)
      • - Over / Under voltage (27/59)
      • #NAME?
      • Failure to start (overcrank)
      • #NAME?
      • #NAME?
      • Low coolant level (requires optional coolant sensor)
      • 4 Programmable relay outputs (Form A)
      • Power Factor (per phase & average)
      • Reverse reactive power (kVAr) (32RV)
      • Emergency stop button
      • #NAME?
      • Over / Under frequency (81 o/u)
      • Volts (L-L & L-N)
      • Warning / Shutdown with common LED indication of shutdowns with indicating lights for:
      • - Power Factor (per phase & average)
      • 2 Programmable digital outputs
      • #NAME?
      • #NAME?
      • #NAME?
      • #NAME?
      • Digital indication for:
      • Engine cool-down timer
      • 6 Programmable digital inputs
      • #NAME?
      • Customer data link (Modbus RTU)
      • #NAME?
      • 2 Programmable PWM outputs
      • #NAME?
      • kVAr-hr (total)
      • Low oil pressure
      • - Over / Under frequency (81 o/u)
      • Accessory module data link
      • Low coolant temperature
      • 16 Programmable digital outputs
      • - kVAr (per phase, average & percent)
      • kVA (per phase, average & percent)
      • - kW (per phase, average & percent)
      • Serial annunciator module data link
      • EMCP 4.2B
      • 2 Programmable relay outputs (Form C)
      • Coolant temperature
      • #NAME?
      • Operating hours
      • - Reverse reactive power (kVAr) (32RV)
      • Programmable protective relaying functions:
      • RPM
      • #NAME?
      • 3 Programmable analog outputs
      • Overcurrent (50/51)
      • Alarm acknowledge
      • #NAME?
      • - Reverse power (kW) (32)
      • kW-hr (total)
      • High coolant temperature
      • #NAME?
      • Communications
      • #NAME?
      • Engine cycle crank
      • EMCP 4.2B controller including:
      • Reverse power (kW) (32)
      • - True RMS AC metering, 3-phase, +/-0.25% accuracy
      • Frequency (Hz)
      • - 24 Volt DC operation
      • Text alarm / event descriptions
      • 3 Programmable analog inputs
      • Speed adjust
      • #NAME?
    • Cooling System
      • Radiator group shipped loose
      • Fan and belt guards
      • SCAC cooling
      • Coolant sensor - (2 x shipped loose: 1/4-18 and 1/2-14 NPTF)
      • Coolant drain line and valves
    • Exhaust System
      • CEM dosing module features:
      • Insulated CEM
      • DEF filter
      • CEM dosing module
      • Harness from dosing module to CEM
      • Air filter
      • Anti-freeze protection
      • 120 VAC
      • Dry exhaust manifold
      • Flanged faced outlets at CEM in (21.2") and out (25")
      • Air and heated DEF lines from dosing module to CEM
    • Fuel System
      • Secondary / tertiary fuel filters
      • Primary fuel filter water / fuel water separator
      • 3 Filters, shipped loose - can be mounted on frame rails (Requires dealer provided flex)
      • 10 Micron spin on type
      • 3 Filters, engine mounted
      • 4 Micron Spin On Type
      • 10 Micron spin on type
    • Generator and Attachments
      • Caterpillar's digital voltage regulator (CDVR) includes:
      • Permanent magnet
      • (MV) Busbar connections, right side extension box, bottom cable entry: - 60 Hz models: NEMA standard hole pattern
      • NEMA Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
      • RFI suppression
      • 3000 Frame generators (MV/HV)
      • 6 Lead
      • Reactive droop capability
      • Class H temperature rise at 40C ambient (125C prime / 150C standby)
      • Form wound
      • 3 Phase voltage sensing
      • KVAR / PF modes
      • Right side extension box, bottom cable entry
      • 3 Phase brushless, salient pole
      • Anti condensation space heater
      • IEC platinum stator RTDs (.00385 temperature coefficient)
      • Exciter diode monitor
      • 1800 Frame generators (LV/MV)
      • Min / Max exciter limiter
      • (LV) Busbar connections, top / center mounted, top cable entry 60 Hz models: NEMA standard hole pattern
      • NEMA Class H insulation
    • Governing System
      • ADEM A4
      • Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
    • Lube System
      • Oil filter, filler and dipstick
      • Gear type lube oil pump
      • Integral lube oil cooler
      • Lubricating oil
      • Prelube - required with prime and continuous; optional with standby
      • Oil drain lines and valve
      • Fumes disposal
    • Mounting System
      • Batteries and battery rack w/cables
      • Battery disconnect switch
      • Rubber anti-vibration mounts (shipped loose)
      • Dual 24-volt electric starting motors
      • Rails - Engine / Generator
    • Service Instructions
      • Two PM Inspections
    • General
      • * For HV applications, customer to provide 120V secondary sensing, 5A secondary current sensing and harness between package and EMCP4.3 (drawing provided). CDVR is installed in wall mount.
      • Paint - Caterpillar yellow with high gloss black rails & radiator
      • *For HV EMCP4.3 control panel: Includes wall mount control panel, shipped loose, for customer mounting and 7.5 meter interconnect harness.
      • RH Service (except oil filter service 60 Hz models: left hand service
      • SAE standard rotation
      • Flywheel and flywheel housing-SAE No. 00
    • Air Inlet System
      • Air cleaner; 4 x single element canister with service indicator(s).
      • Single stage air cleaner

    • Air Inlet System
      • Single stage air cleaner
    • Control Panels
      • Customer interface options
      • Customer AC-DC connection mounting location - LV / MV
      • EMCP 4.3 and EMCP 4.4 (requires 1800 frame low voltage package)s
      • Remote speed adjust
      • Modbus monitoring of packages
      • Vandal proof panel door
      • E-Stop - Only for use with 3000 frame generators and EMCP4.3
      • Generator temperature monitoring
      • EMCP mounting location - LV / MV (requires 1800 frame generator)
      • Load share module
      • Load share governor / auxiliary plate and auxiliary box (LV)
      • Annunciator modules
    • Cooling System
      • SCAC circuits
      • Package mounted radiator
      • Remote radiators
      • Fuel cooler
    • Exhaust
      • Exhaust collectors / manifold
    • Fuel System
      • Primary fuel filter
    • General
      • Paint - colors (other than Caterpillar yellow) or high performance paints
      • US aid emblem
    • Generator and Attachments
      • Differential current transformers (DCT): - 5, 9 and 15 kV class DCTs
      • Space heater kit
      • 480 Volts, Generators (MV) 60 Hz, 3 phase, 1800 rpm, FW, PM, 6 leads, pitch = 0.6667 -- 1800, 3000 frame
      • Thermostat for space heater
      • 480 Volts, Generators (LV) 60 Hz, 3 phase, 1800 rpm, FW, PM, 6 leads, pitch = 0.6667 - 1800 frame
    • Instrumentation
      • Harness - ECM interconnect
      • Pyrometer and thermocouples
    • Lube System
      • Electric prelube pump
      • Lubricating oil
      • Standard sump oil pan
      • Oil pan drain valve
      • Oil filters
      • Lube oil heater
    • Crankcase Systems
      • Explosion relief valves
    • Mounting System
      • Spring-type linear vibration isolators
      • Rubber anti-vibration mounts
      • IBC vibration isolators - shipped loose
    • Power Connections
      • 5000 Amp, 3 Pole, UL-100% rated circuit breakers
      • Side / Rear monted busbars (LV)
      • MV Power Connection Options: 1800 Frame generator side / rear mounted busbars - Left hand MV nema busbar - Right hand MV nema busbar
      • 5000 Amp, 3 Pole, IEC-rated circuit breakers
      • Center post busbars (LV) connections
      • Neutral ground - (MV)
      • Cable entry options (LV)
      • Masterpack breaker connections
      • Circuit Breaker Harness
      • Power connection covers
      • Cable entry options - 1800 frame (MV)
      • Control packaging (LV) - Enclosures
      • Optional package mounted circuit breakers (LV)
      • 4000 Amp, 3 Pole, UL-100% rated circuit breakers
      • 4000 Amp, 3 Pole, IEC-Rated circuit breakers
    • Service Tools - Barring Groups
      • Control GP-airpowered group
      • Engine group
      • Group manual
      • Engine air powered
    • Special Tests / Reports
      • Standard genset torsional vibration analysis (TVA) report
      • Custom genset TVA report
      • Standard engine test charge
      • PGS test report @ 0.8 power factor
      • Generator test report
      • PGS test report @ 1.0 power factor
      • Fuel consumption test
    • Starting/Charging
      • Heavy duty battery set with rack
      • Jacket water heater wiring groups
      • Jacket water heaters
      • 24 Volt power distribution box
      • 35 and 50 Amp battery chargers
      • Covers - starter locations
      • 24 Volt electric starting motor
      • Air starting motor
      • 24 Volt battery set - dry

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN