THIS IS MY SELECT
C18 Generator Set
Maximum Rating
600 ekW
Minimum Rating
500 ekW
Emissions/Fuel Strategy
Low Fuel Consumption
SPECIFICATIONS
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Engine Specifications
Engine Model
C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore
5.71 in
145 mm
Stroke
7.2 in
183 mm
Displacement
1,106.4 in³
18.1 l
Compression Ratio
14.5:1
Aspiration
Air to Air Aftercooled
Fuel System
Electronic unit injection
Governor Type
Adem™A4
Generator Set Dimensions
Length - Maximum
218.5 in
5,550 mm
Width - Maximum
80.9 in
2,056 mm
Height - Maximum
107.8 in
107.8 mm
Generator Set Specifications
Maximum Rating
600 ekW
Minimum Rating
500 ekW
Emissions/Fuel Strategy
Low Fuel Consumption
Voltage
220 to 380 Volts
Frequency
60 Hz
Speed
1800 rpm
Duty Cycle
Standby, Prime
- Air Inlet
- Air cleaner
- Cooling
- Package mounted radiator
- Exhaust
- Exhaust flange outlet
- Fuel
- Fuel priming pump
- Secondary fuel filters
- Primary fuel filter with integral water separator
- Generator
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
- Power Termination
- Busbar
- Control Panel
- GCCP 1.3
- Mounting
- Rubber vibration isolators
- Starting/Charging
- 24 volt starting motor
- Batteries
- General
- Paint - Caterpillar yellow except rails and radiators gloss black
- Exhaust
- Industrial, residential, critical mufflers
- Generator
- Anti-condensation heater
- Oversize and premium generators
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
- Power Termination
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
- Control Panels
- Remote monitoring software
- Local & remote annunciator modules
- Digital I/O module
- GCCP 1.4
- Load share module
- Starting/Charging
- Oversize batteries
- Battery chargers
- Heavy duty starting system
- Jacket water heater
- Charging alternator
- General
- Narrow, wide or skid base
- CSA Certification
- UL 2200 package
- EU Certificate of Conformance (CE)
- Enclosures: Sound attenuated, weather protective
- Single or dual wall integral fuel tanks
- Integral & sub-base UL listed dual wall fuel tanks
- Automatic transfer switches (ATS)
- Sound attenuated, weather protective or high ambient weather protective enclosure
- The following options are based on regional and product configuration:
- Single or dual wall sub-base fuel tanks
- EEC Declaration of Conformity
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity