THIS IS MY SELECT

Diesel Generator Sets

C18 Generator Set

Maximum Rating

500 ekW

Minimum Rating

455 ekW

Emissions/Fuel Strategy

U.S. EPA Tier 4 Final

SPECIFICATIONS

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

    Engine Specifications

    Engine Model

    C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

    Bore

    1,455.7 in

    Stroke

    7.2 in

    Displacement

    1,106.4 in³

    Compression Ratio

    14.5:1

    Aspiration

    Air to Air Aftercooled

    Fuel System

    Electronic unit injection

    Governor Type

    Adem™A4

    Generator Set Specifications

    Maximum Rating

    500 ekW

    Minimum Rating

    455 ekW

    Emissions/Fuel Strategy

    U.S. EPA Tier 4 Final

    Voltage

    480 Volts

    Frequency

    60 Hz

    Speed

    1800 rpm

    Duty Cycle

    Standby, Prime

    • Air Inlet
      • Air cleaner
    • Exhaust System
      • Exhaust manifold - dry
    • Cooling
      • Package mounted radiator
    • Fuel System
      • Fuel cooler
      • Engine fuel transfer pump
      • Primary fuel filter w/integral water separator and secondary filter
      • Fuel priming pump
      • Flexible fuel lines
    • Exhaust
      • Exhaust flange outlet
    • Fuel
      • Primary fuel filter with integral water separator
      • Fuel priming pump
      • Secondary fuel filters
    • Generator
      • Matched to the performance and output characteristics of Cat engines
      • IP23 Protection
      • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
    • Power Termination
      • Busbar
    • Lube System
      • Oil filter and dipstick
      • Lubricating oil
      • Oil drain lines with valve; piped to edge of base
      • Fumes disposal, piped to front of radiator
      • Oil cooler
    • Control Panel
      • GCCP Genset Controller
    • Mounting
      • Rubber vibration isolators
    • Protection System
      • Safety shutoffs for: Higher water temperature - Overspeed - Low oil pressure
    • Cooling System
      • Thermostats and housing, full open temperature 92 deg C (198 deg F)
      • Coolant level sensor
      • Coolant level sight gauge
      • Fan and belt guards
      • Jacket water pump, gear driven, centrifugal
      • Coolant drain line with valve; terminated on edge of base
      • Caterpillar extended life coolant
    • Starting/Charging
      • 24V, 45 Amp Charging alternator
      • 24 Volt electric starting motor
      • 24 volt starting motor
      • Batteries
    • General
      • Paint - Caterpillar yellow except rails and radiators gloss black
      • Paint, Caterpillar yellow
      • Operation and maintenance manual pack and OMM storage compartment
      • Parts book
      • Vibration damper
    • Control System
      • Local annunciator
      • Programmable Input / Output: 2 programmable digital inputs - 2 programmable relay outputs (Form A) - 2 programmable relay outputs (Form C)
      • Suitable for use as service equipment label
      • Separation plate
      • Control panel mounting location
      • Breaker box mounting location
      • Optional external analog input
      • Remote annunciators
      • GCCP 1.2
      • Communications: Customer data link (RS485 Modbus RTu) - Serial annunciator module data link for local and remote annunciator IVR - Integrated Voltage Regulation (Digital) - EM10 Excitation Module
      • Controls include: Run/auto/ stop/control - Speed adjust - Voltage adjust - Engine cycle crank - Emergency stop pushbutton
      • Digital indication for: rpm - DC volts - operating hours - Oil pressure (psi, kPa or bar) - Coolant temperature (C or F) - Volts (L-L & L-N), frequency (Hz) - Amps (per phase & average) - Power factor (per phase & average) - kW (per phase & average) - kVA (per phase & average) - kVAr (per phase and average) - kW-hr (total) - kVAr-hr (total)
      • Programmable protective relaying functions: Generator phase sequence - Over/under voltage (27/59) - Over/under frequency (81 o/u) - Overcurrent (50/51)
      • Warning/shutdown with common LED indication of shutdowns for: Low oil pressure - high coolant temperature - Overspeed - Emergency stop - Failure to start (overcrank) - Low coolant temperature - Low coolant level
      • Control panel options: Dust proof control panel - volt free contact - Device server - Ground fault relay
    • Governing System
      • Cat electronic governor (ADEM A4)
    • Generator and Attachments
      • Segregated low voltage (AC/DC) wiring panel
      • Brushless, self-excited 2/3 pitch, random wound.
      • Insulation Class H and temperature rise
      • AREP generator
      • CIP - generators
      • IP23 Protection
      • Power center, IP22 bottom cable entry
    • Air Inlet System
      • Single element air filter
      • Air cleaner - Heavy duty
      • Air cleaner - Single element
    • Extended Service Coverage
      • Silver, Gold and Platinum coverage
    • Circuit breakers
      • 3 Pole 100% rated

    • Control System
      • Ground fault relay
      • Dust proof control panel
      • Breaker box mounting location
      • Volt free contact
      • Device server
      • Separation plate
      • Remote annunciators
      • GCCP 1.5
      • Local annunciator
      • Remote E-stop button
      • Optional external analog input
      • Control panel mounting
    • Exhaust
      • Industrial, residential, critical mufflers
    • Generator
      • Anti-condensation heater
      • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
      • Oversize and premium generators
    • Power Termination
      • Circuit breakers, UL listed
    • Generators and Attachments
      • AREP generator
      • CIP generators
      • Space heater
      • Generator mounting and duct plate
    • Air Inlet System
      • Single element air filter
      • Dual element air cleaner
    • Certifications
      • Certificate of Compliance
      • IBC Certification wind load
    • Circuit breakers
      • Motorized single circuit breaker
      • Neutral bars
      • Power cables
      • Dual breakers first circuit breaker (CB2) LS/I package mounted
      • Current transformers
      • Package mounted single circuit breakers
      • Dual breakers first circuit breaker (CB1) LS/I package mounted
      • Auxiliary contacts
    • Cooling System
      • Aftertreatment guard
      • Standard radiator
    • Enclosures
      • Sound attenuated enclosures
    • Exhaust System
      • Flange kits
      • Exhaust flexible fittings
    • Fuel System
      • 660 gallon base tank
    • Generator Attachments
      • Permanent magnet excitation (PMG) generator
    • Mounting System
      • Standard base wide
      • 5 Gallon spill containment
      • Optional CB shroud
      • Overfill prevention valve
      • Locking fuel fill
    • Starting / Charging System
      • Battery disconnect switch
      • Jacket water heater
      • Shore power control group
      • 10 Amp dual Battery charger
    • TESTS
      • PGS Test report @ 0.8 power factor
      • 4 Hour factory test (un-witnessed)
      • PGS Test report @ 1.0 power factor
      • Generator test report

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN