THIS IS MY SELECT
C280-6 Generator Set (Medium Speed)
Maximum Rating
1820 ekW (60Hz), 2425 kVA (50Hz)
Minimum Rating
1650 ekW (60Hz), 2200 kVA (50Hz)
Emissions/Fuel Strategy
IMO Tier 2
Request a Quote
SPECIFICATIONS
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Engine Specifications
Engine Model
C280-6, I-6,4-Stroke Water-Cooled Diesel
Bore
11 in
280 mm
Stroke
11.8 in
300 mm
Displacement
111 in³
6,762 l
Compression Ratio
13:01
Aspiration
TA
Fuel System
Direct unit injection
Governor Type
Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum
404 in
10,261.7 mm
Width - Maximum
99.62 in
2,530.3 mm
Height - Maximum
156.6 in
3,977.7 mm
Dry Weight - Genset (maximum)
74,970 lb
34,070 kg
Generator Set Specifications
Maximum Rating
1820 ekW (60Hz), 2425 kVA (50Hz)
Minimum Rating
1650 ekW (60Hz), 2200 kVA (50Hz)
Emissions/Fuel Strategy
IMO Tier 2
Frequency
50 / 60 Hz
Speed
900 / 1000 rpm
Duty Cycle
Prime, Continuous
- Air Inlet System
- Air inlet shutoff
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Breather, crankcase, top-mounted
- Cooling System
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
- Exhaust System
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Fuel System
- Simplex or duplex
- Generator System
- Custom generator per generator data sheet completed by dealer
- Governor System
- UG Actuator
- Lube System
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Service side engine mounted on cylinder block inspection covers
- Crankcase explosion relief valves
- Oil filler and dipstick
- Oil pressure regulating valve
- Mounting System
- Damper, torsional vibration
- Engine and generator mounting
- Starting / Charging System
- Vane type air starter
- Line group for single point custom connection
- Air silencer
- One motor, engine mounted at rear, on left side
- General:
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
- Air Inlet System
- Air inlet adapter
- Soot filter
- Heavy duty air cleaner
- Boost control valve
- Air cleaner louver assembly
- Air cleaner
- Vertical support bracket
- Cooling System
- Auxiliary water pump
- Cooling system aids
- Heating aids
- Expansion tank
- Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
- Fuel System
- Fuel system connections
- Fuel priming pump
- Duplex primary fuel strainer
- Generator System
- Class F insulation
- 3 Phase, six Leads, WYE
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters
- Governor System
- 723 Plus
- Digital programmers
- Electronic/actuators
- Battery backup/power supply
- 2301 A load share
- EGB actuator
- Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
- Mounting System
- Isolator
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
- General:
- Custom paint colors
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity