THIS IS MY SELECT
Cat® C3.6 Diesel Engine for Tractors
Maximum Power
134 hp
100 kW
Maximum Torque
391 lb-ft @ 1500 rpm
530 Nm @ 1500 rpm
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V
Request a Quote
SPECIFICATIONS
The Cat® C3.6 agricultural tractor engine offers the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 kW (134 hp) @ 2200 rpm.
The C3.6 is designed to meet the specific requirements of agricultural tractors including structural sump with integral twin balancer shafts.
The C3.6 meets EU Stage V, U.S. EPA Tier 4 Final, and Japan 2014 emission standards.
Emission Standards
Emissions
U.S. EPA & CARB Tier 4 Final, EU Stage V
Engine Dimensions - Approximate
Length
26.8 in
667 mm
Width
22.2 in
564 mm
Height
33.7 in
855 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
840 lb
381 kg
General
Engine Configuration
In-Line 4
Bore
3.9 in
98 mm
Stroke
4.7 in
120 mm
Displacement
220 in³
3.6 l
Compression Ratio
17.0:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF or DOC+DPF+SCR
Power Rating
Maximum Power
134 hp
100 kW
Maximum Torque
391 lb-ft @ 1500 rpm
530 Nm @ 1500 rpm
Rated Speed
2000-2400 rpm
Minimum Power
74 hp
55 kW
- Control System
- Starter motor (12V)
- Alternator (12V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus SAE J1939
- Flywheels and Flywheel Housing
- Agricultural back plate for transmission mounting
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
- Fuel System
- Fuel filter – chassis mounted
- With water sensor
- Lube System
- Lubricating oil filters
- High incline oil pan – 25° continuous in all directions
- General
- Cold start capability to -25° C (-13° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC) and Diesel Particulate Filter (DPF)
- Selective Catalytic Reduction (SCR) (not required 56 kW)
Similar Models
WHY CHOOSE EMPIRE
-
Machines built tough and ready to run in rugged applications
-
Trusted advisors to help you find and maximize your equipment
-
Wide inventory of rental equipment that lets you try before you buy
-
Full service and support to ensure performance and longevity