THIS IS MY SELECT

Gas Compression Engines

G3306B Gas Compression Engine

Maximum Rating

211 BHP

Emissions

Rich Burn: EPA NSPS Site Compliant Capable with Caterpillar or Customer Supplied AFRC & Aftertreatment

Displacement

638 in³

SPECIFICATIONS

Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3306B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3306B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3306B gas engine. Ratings: 108-157 bkW (145-211 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar or customer-provided air-fuel ratio control and aftertreatment.

    Capacity for Liquids

    Cooling System

    5.25 gal (US)

    Lube Oil System - Refill

    11.9 gal (US)

    Engine Specifications

    Maximum Rating

    211 BHP

    Emissions

    Rich Burn: EPA NSPS Site Compliant Capable with Caterpillar or Customer Supplied AFRC & Aftertreatment

    Displacement

    638 in³

    Minimum Rating

    145 BHP

    Compression Ratio

    10.5:1

    Aspiration

    Naturally Aspirated or Turbocharged - Aftercooled

    Rotation from Flywheel End

    Counterclockwise

    Flywheel and Flywheel Housing

    SAE No. 1

    Flywheel Teeth

    156

    Weight - Dry

    2,090 lb

    Oil Change Interval

    750 hours

    Ignition, Protection

    ADEM A4

    Air/Fuel Ratio Control

    ADEM A4

    Stroke

    in

    Bore

    4.8 in

    Length

    60 in

    Width

    38 in

    Height

    50 in

    Rated Speed

    1,800 rpm

    • Air Inlet System
      • Air cleaner — intermediate duty, dry
      • Air cleaner rain cap (shipped loose)
      • Service indicator
    • Control System
      • ADEM A4
    • Cooling System
      • Thermostats and housing — full open temperature 97°C (207°F)
      • Jacket water pump — gear-driven, centrifugal, non-self-priming
    • Exhaust System
      • Exhaust manifolds — watercooled
      • Exhaust elbow — dry
      • 102 mm (4 in)
      • Three-way catalyst — 1.0 g NOx and 0.5 g NOx catalyst options
    • Flywheels & Flywheel Housings
      • Flywheel, SAE No. 1
      • Flywheel housing, SAE No. 1
      • SAE standard rotation
    • Fuel System
      • Air/fuel ratio control
      • Gas pressure regulator
      • Requires 10.3-34.5 kPa (1.5-5 psi) gas
      • Natural gas carburetor
    • Ignition System
      • ADEM A4 ignition
    • Lube System
      • Crankcase breather, top mounted
      • Oil cooler
      • Oil filter
      • Oil pan, full sump
      • Oil filler and dipstick
    • Protection System
      • The following parameters include alarm and shutdown

    • Charging Alternator
      • 24V, 35A alternator
      • 24V, 35A CSA alternator*
    • Cooling System
      • Radiators
      • Jacket water pump inlet adapter
    • Exhaust System
      • Exhaust flex fitting — ANSI flange
      • Exhaust elbow
      • Exhaust flange — ANSI flange
    • Guards
      • Fan guard
      • Damper guard
    • Ignition System
      • CSA certified electronics and ignition
    • Instrumentation
      • Operator interface panel
      • Operator interface panel enclosure
      • 15', 20' and 50' interconnect harness
    • Starting System
      • Air pressure regulator
      • Air start silencer
      • Vane starter
      • Electric starter
      • Turbine starter

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN