THIS IS MY SELECT

Gas Compression Engines

G3520J Gas Compression Engine

Emissions

Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.5 g/bhp-hr NOx

Minimum Rating

1,680 BHP

Oil Change Interval

2000 hours

SPECIFICATIONS

The line of G3520J engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3520J engines include primary gathering, central gathering, and gas processing plants.

    Capacity for Liquids

    Lube Oil System - Refill

    143 gal (US)

    Engine Specifications

    Emissions

    Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.5 g/bhp-hr NOx

    Minimum Rating

    1,680 BHP

    Oil Change Interval

    2000 hours

    Combustion

    Lean Burn

    Stroke

    7.5 in

    Rotation from Flywheel End

    Counterclockwise

    Bore

    6.7 in

    Aspiration

    Turbocharged - 2 stage Aftercooled

    Maximum Rating

    1,725 BHP

    Displacement

    5,263 in³

    Length

    162 in

    Width

    74 in

    Height

    93 in

    Weight - Dry

    23,776 lb

    Flywheel Teeth

    183

    Rated Speed

    1,400 rpm

    Governor and Protection

    Governor and Protection

    Electronic (ADEM™ A3)

    • Air Inlet System
      • Axial flow air cleaners
      • Air inlet adapter
      • Single element canister type with service indicator
    • Charging System
      • Alternator
      • Upper RH Accessory Drive
    • Control System
      • ADEM A3 system
      • HMI Panel
    • Cooling System
      • Aftercooler thermostats and housing
      • Inlet Flange Connection
      • Jacket water thermostats and housing
      • JW and SCAC engine driven pumps
    • Exhaust System
      • Exhaust Manifold
      • Exhaust Outlet
      • Exhaust Weld Flange
      • Hard Shielded turbine housing and turbine in lines
      • Integrated Temperature Sensing Module
    • Flywheels & Flywheel Housings
      • Flywheel housing SAE No. 00
      • Flywheel SAE No. 21-double weight
    • Fuel System
      • Electronic fuel metering valve
      • Electronic fuel metering valve
      • Gas pressure regulator
    • General
      • Paint
    • Lube System
      • Oil Cooler
      • Air Prelube Pump
      • Crankcase Breathers
      • Drain Valve
      • Oil Filter, RH
      • Oil Pan, capacity 160 gallon
      • Oil Sampling Valve
      • Turbo Oil Accumulator
    • Mounting System
      • Rails
    • Power Take-offs
      • Accessory Drives
      • Crankshaft Pulley
      • Damper and Damper Guard
    • Starting System
      • Starter
      • Engine Barring Device
    • Telematics System
      • Interconnect Harness
      • Interconnect Harness

    • Exhaust System
      • Exhaust Expanders
      • Flexible Exhaust Fitting
    • Fuel System
      • Fuel Filter
      • Gas shut-off valve
    • General
      • Language Decals
      • Service Tools
    • Lube System
      • Lubricating Oil
    • Power Take-offs
      • Front Stub Shaft
    • Protection System
      • Crankcase explosion relief valves
    • Starting System
      • Jacket Water heater
    • Telematics System
      • Cat connect technology
      • Cell - satellite radio
      • LAN Adapter
      • Product Link Extension Harness

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN