THIS IS MY SELECT

Gas Compression Engines

G3516J Gas Engine

Maximum Rating

1,035 BHP

Emissions

Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.5 g/bhp-hr NOx

Displacement

3,173 in³

SPECIFICATIONS

The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. The Cat G3512J gas engines are rated at 772 bkW (1035 bhp) @ 1400 rpm and are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment.

    Capacity for Liquids

    Lube Oil System - Refill

    89 gal (US)

    Engine Specifications

    Maximum Rating

    1,035 BHP

    Emissions

    Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.5 g/bhp-hr NOx

    Displacement

    3,173 in³

    Minimum Rating

    1,035 BHP

    Aspiration

    Turbocharged - Aftercooled

    Oil Change Interval

    2000 hours

    Stroke

    7.5 in

    Bore

    6.7 in

    Lube Oil System

    336.9 L (89 gal)

    Combustion

    Lean Burn

    Governor

    Electronic (ADEM A3)

    Rotation from Flywheel End

    Counterclockwise

    Length

    120 in

    Width

    86.7 in

    Height

    84.1 in

    Weight - Dry

    15,611 lb

    Rated Speed

    1,400 rpm

    Flywheel Teeth

    Flywheel Teeth

    183

    • Air Inlet System
      • Axial flow air cleaners
      • Single element canister type with service indicator
    • Cooling System
      • Two-stage charge air cooling system
      • Engine cooling and charge air cooling thermostats
    • Exhaust System
      • Watercooled exhaust manifolds
      • Dry Turbocharger housings
      • Water-cooled exhaust elbow
    • Flywheels & Flywheel Housings
      • SAE No. 00 flywheel housing
      • SAE standard rotation
      • SAE No. 21 Flywheel
    • Fuel System
      • 7-40 psig gas supply
      • Electronic fuel metering valve
      • Gas pressure regulator
      • Gas shutoff valve
      • Fuel System
    • Instrumentation
      • Remote-mounted Advisor control panel
      • Interconnect harness
    • Lubrication System
      • Crankcase breather — top mounted
      • Oil cooler
      • Oil filter — RH
      • Oil pan — shallow
      • Oil sampling valve
      • Turbo oil accumulator
    • Mounting System
      • Rails
    • Protection System
      • Electronic shutoff system
      • Gas shutoff valve
    • General
      • Paint — Cat yellow
      • Crankshaft vibration damper and guard
    • Power Take Offs
      • Front lower LH accessory drive
      • Front housing, two sided

    • Air Inlet System
      • Remote air inlet adapters
      • Rain Shield
    • Charging System
      • CSA Alternator (24V, 65A)
    • Exhaust System
      • Flexible fittings
      • Elbows
      • Flange
      • Mufflers
    • Fuel System
      • Fuel filter
    • Lubrication System
      • Oil bypass filter
      • Deep sump oil pan
      • Air prelube pump
      • Lubricating oil
      • Oil pan drain
    • Power Take-Offs
      • Front stub shaft
    • Protection System
      • Explosion relief valves, status control box interconnect wiring harness
    • Starting System
      • 90 psi starter
      • 150 psi starter
    • EU Certification
      • EEC DOI certification

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN