THIS IS MY SELECT

Gas Compression Engines

G3516J Gas Engine

Maximum Rating

1,500 BHP

Emissions

Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

Displacement

4,211 in³

SPECIFICATIONS

The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. The Cat G3516J gas engines are rated at 1029 bkW (1380 bhp) @ 1400 rpm and 1119 bkW (1500 bhp) @ 1400 rpm and are NSPS site compliant capable with customer-provided aftertreatment.

    Engine Specifications

    Maximum Rating

    1,500 BHP

    Emissions

    Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

    Displacement

    4,211 in³

    Minimum Rating

    1,380 BHP

    Aspiration

    Turbocharged - 2 Stage Aftercooled

    Oil Change Interval

    2000 hours

    Stroke

    7.5 in

    Bore

    6.7 in

    Lube Oil System

    423 L (112 gal)

    Governor

    Electronic (ADEM A3)

    Combustion

    Lean Burn

    Flywheel and Flywheel Housing

    Counterclockwise

    Rated Speed

    1,400 rpm

    • Air Inlet System
      • Air inlet adapter
      • Air Cleaner
    • Cooling System
      • Two-stage charge air cooling system
      • Engine cooling and charge air cooling thermostats
    • Exhaust System
      • Exhaust manifolds
      • Exhaust Outlet
      • Exhaust elbow
      • Exhaust Weld Flange
      • Hard-shielded turbine housing and turbine in lines
    • Fuel System
      • Electronic fuel metering valve
      • Gas pressure regulator
      • Gas shutoff valve
      • Fuel Heater
    • Control System
      • 8 inch HMI Engine Control Panel
      • Interconnect harness
    • Lubrication System
      • Crankcase breather — top mounted
      • Oil sampling valve
      • Oil Cooler
      • Oil sampling valve
      • Turbo oil accumulator
    • Protection System
      • Gas shutoff valve
    • Power Take Offs
      • Front housing, two sided
    • Engine Rating
      • Hard-shielded turbine housing and turbine in lines

    • Charging Ssytem
      • Alternator
    • Charging System
      • Upper RH Accessory Drive
    • General
      • Language Decals
    • Lube System
      • Air Prelube Pump
      • Lubricating Oil
      • Oil Drain
      • Oil filter
      • Oil Pan
    • Lubrication System
      • Air prelube pump
      • Lubricating oil
      • Oil pan drain
    • Protection System
      • Explosion relief valves
    • Starting System
      • 90 psi starter
      • 150 psi starter

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN