THIS IS MY SELECT

G3516B LE Gas Engine

Maximum Rating

1,380 BHP

Emissions

NSPS Site Compliant Capable

Displacement

4,230 in³

Browse Rental Power Systems Search Used Power Systems

REQUEST A QUOTE

Download Product Brochure

Document 1

View Current Deals

SPECIFICATIONS

The line of G3500B engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3500B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3508B gas engine. Ratings: 1029 bkW (1380 bhp) @ 1400 rpm are NSPS site compliant capable.

FULL SPECIFICATIONS

Capacity for Liquids

Cooling System

58.5 gal (US)

Lube Oil System - Refill

112 gal (US)

Engine Specifications

Maximum Rating

1,380 BHP

Emissions

NSPS Site Compliant Capable

Displacement

4,230 in³

Minimum Rating

1,380 BHP

Aspiration

Turbocharged-2 Stage Aftercooled

Flywheel and Flywheel Housing

SAE No. 00

Flywheel Teeth

183

Weight - Dry

18,520 lb

Oil Change Interval

1000 hr

Ignition, Protection

ADEM™ A3

Stroke

7.5 in

Bore

6.7 in

STANDARD EQUIPMENT

Air Inlet System
- Axial flow air cleaners
- Service indicator
- Cleanable
Cooling System
- Two-stage charge air cooling:
- Engine cooling and charge air cooling thermostats
Exhaust System
- Dry exhaust manifolds and turbocharger housings
Flywheels and Housings
- SAE 00 flywheel
- SAE 00 flywheel housing
- SAE standard rotation
Fuel System
- Electronic fuel metering valve
- Requires 7-50 psig gas supply
- Gas pressure regulator
- Gas shutoff valve
Instrumentation
- Remote-mounted Advisor control panel
- Interconnect harness
Lube System
- Top-mounted crankcase breathers
- Oil cooler
- Oil filter and oil sampling valve
- Drain valve
- Turbo oil accumulator
- API B16.3 approved gas/air-driven pre-lube system
Torsional Vibration Analysis
- Caterpillar provided
Mounting
- Rails
Control Panels
- 4" LCD Advisor display panel
- Shipped loose
Starting System
- 90 psi TDI starter
- 150 psi TDI starter
Power Take-Offs
- Front housing, two sided
- Front lower LH accessory drive
Protection System — Display/Alarm/Shutdown
- Low oil pressure
- Oil filter differential pressure
- High fuel or oil temperature
- Engine oil to engine coolant
- Differential temperature
- High coolant temperature
- Engine speed
- Engine load
- Battery voltage
- Detonation
- Manifold air temperature
- Coolant JW inlet/outlet pressure
- Left turbo inlet temperature
- Right turbo inlet temperature
- Cylinder port temperature
Protection System — Display Only
- Service hours
- Oxygen level
General
- Paint — Cat yellow
- Dual 23" vibration damper with guard
- CSA Certification, Class 1 Division 2 Groups C and D

OPTIONAL EQUIPMENT

Air Inlet System
- Rectangular air inlet adapter
- Circular air inlet adapter
Charging System
- Battery Charger 20 amp
Connections
- Mechanical joint assembly
- Inlet connection
Exhaust System
- Flexible fittings available at first production build
- Elbows and mufflers
Instrumentation
- Optional interconnect harness
Lube System
- Shipped with lube oil
Mounting System
- Rails
Power Take-Offs
- Front stub shaft
Literature
- Options available