THIS IS MY SELECT

Well Service Engines

C9.3 ACERT™ Tier 4 Final Engine

Maximum Rating

400 BHP

Emissions

EPA Tier 4 Final and EU Stage IV

Displacement

567.5 in³

SPECIFICATIONS

Cat C9.3 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C9.3 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements. This is an ideal engine for applications that require compliance with the highest emission standards in well service applications such as workover rigs, pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C9.3 ACERT engines with ratings: 224-298 bkW (300-400 bhp) @ 1800-2200 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.

    Dimensions

    Length

    44 in

    Width

    40.4 in

    Height

    41.9 in

    Weight

    1,950 lb

    Emissions

    Emissions

    EPA Tier 4 Final and EU Stage IV

    General Specifications

    Maximum Rating

    400 BHP

    Displacement

    567.5 in³

    Minimum Rating

    300 BHP

    Aspiration

    Turbocharged-Aftercooled

    Flywheel and Flywheel Housing

    SAE 1 or 2

    Flywheel Teeth

    113 (SAE 1), 138 (SAE 2)

    Stroke

    5.87 in

    Bore

    4.53 in

    • Control System
      • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
    • Cooling System
      • Cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat. com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
    • Exhaust System
      • Mid-mount turbocharged system with front and rear exhaust configurations
    • Flywheels and Flywheel Housing
      • SAE No. 1 and SAE No. 2 flywheel housings; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
    • Fuel System
      • Electronic high pressure common rail; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
    • Lube System
      • Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
    • General
      • Paint: Cat yellow

    Similar Models

    WHY CHOOSE EMPIRE

    • Machines built tough and ready to run in rugged applications

    • Trusted advisors to help you find and maximize your equipment

    • Wide inventory of rental equipment that lets you try before you buy

    • Full service and support to ensure performance and longevity

    YOU MIGHT ALSO BE INTERESTED IN