Grade Control System Fundamentals Training

Event Details

Empire offers a two-day training course that prepares participants to work with machines equipped with the latest generation of Cat Grade Control 2D and 3D components, including track-type tractors, hydraulic excavators, and motor graders.

What You Will Learn:

Understand the need for a GNSS Infrastructure for a proper Cat Grade Control 3D operation
Operation of all Cat Grade Control 2D and 3D components
Functionality of ease-of-use features
How to navigate the operator interface for Cat Grade
How to configure the Cat Grade Control CMR’s source
How to configure settings to enable Automatic Function of Cat Grade Control

While Empire instructors teach on Cat equipment, the knowledge gained from the course can be applied to other heavy equipment manufacturers.

Registration Details:

The class fee is $1,300 per person and includes classroom, course presentation, computer-based training, refreshments and lunch. Complete the form below and we will contact you to complete the registration and payment process.

Classes are open to Empire clients only. If you are unsure if you are an Empire client or would like more information, please complete the form below or contact us at (775)-778-6550.

Select A Date

Mesa Training Institute 1855 S. Macdonald Mesa, AZ 85210 United States	Feb 2-3, 2026	8:00 am - 5:00 pm MST	Mesa, AZ Mesa Training Institute 1855 S. Macdonald Mesa, AZ 85210 United States	SELECT +	437041	SELECT DATE
Mesa Training Institute 1855 S. Macdonald Mesa, AZ 85210 United States	Oct 5-6, 2026	8:00 am - 5:00 pm PST	Mesa, AZ Mesa Training Institute 1855 S. Macdonald Mesa, AZ 85210 United States	SELECT +	437046	SELECT DATE

WHAT TO WEAR

Safety glasses and steel-toed boots or shoes are required. No shorts, tank tops, or open toed shoes allowed. All cotton clothing is recommended. Remember, these are hands on courses, so please plan and dress accordingly.

WHERE TO STAY

Hotel accommodations are not provided by Empire and are not included in the course fee. The hotels below are located nearby.
Days Hotel by Wyndham Mesa Near Phoenix
333 West Juanita Avenue Mesa, AZ 85210
480-844-8900
BOOK NOW >>
Holiday Inn & Suites Phoenix-Mesa/Chandler
1600 S. Country Club Dr. Mesa, AZ 85210
480-964-7000
BOOK NOW >>
Shutters Hotel Elko
3650 Idaho St, Elko, NV 89801 | 775-777-1200
BOOK NOW >>
Home 2 Suites by Hilton Elko
2572 E Jennings Way, Elko, NV 89801 | 775-234-5354
BOOK NOW >>

CANCELLATION DETAILS

All cancellation requests must be made in writing. Full refunds will be issued up to 30 days prior to the start date of the course. Empire reserves the right to cancel or change the dates of any training course due to insufficient enrollment. If canceled by Empire all registration fees will be refunded or applied to another scheduled date.

Select a date to see specific date and location information

SAVE MY SEAT

Complete the form and we'll contact you to complete the payment process or contact us at 775-778-6550 for more information.

EQUIPMENT

PARTS

SERVICE

SUPPORT

COMPANY

EQUIPMENT

PARTS

SERVICE

SUPPORT

COMPANY

Grade Control System Fundamentals Training

Event Details

Select A Date

SAVE MY SEAT

This two-day course is designed for service personnel to gain the necessary knowledge and skills to identify components and features of Oval and Elevated Sprocket Undercarriages.

This two-day course is designed for service technicians to gain knowledge and develop troubleshooting skills on Tier 4 Interim and Tier 4 Final Emissions Systems.

Empire’s two-day training course is designed for service personnel to gain knowledge and develop skills on diesel engines.

This full-day course is designed for advanced and entry level technicians to gain the knowledge and develop an in-depth understanding of the tools provided for effective electrical and hydraulic schematic reading.

This full-day course is designed for service personnel to gain knowledge of the navigation, operation and features of the Cat SIS 2.0 program.

This two-day course is designed for service personnel to gain knowledge and develop skills on basic hydraulic principles, components, functions, graphical symbols, and hydraulic systems used on machines.

This two-day course is designed for service personnel to gain knowledge and develop skills on powertrain systems.

A full-day training course that provides hands-on training with Caterpillar Electronic Technician (Cat ET), the factory-approved diagnostic software for electronically controlled Caterpillar engines and machines.

This two-day course introduces the concepts and benefits behind LSPC and PPPC hydraulic systems as used in hydraulic systems.

This two-day course is designed for service personnel to gain knowledge and develop skills on different parts of powertrain control systems.

This two-day course is designed for service technicians to gain knowledge and develop troubleshooting skills on heavy equipment electrical systems.

This one-day course will cover auto lubrication systems that are found on most mining equipment, such as trucks and loaders.

This two-day course is designed for service personnel to gain knowledge and develop skills on lower powertrain systems.

This two-day course is designed for service technicians to develop testing, troubleshooting and servicing skills of operator compartment A/C systems.

This full-day course is designed for service personnel to gain the necessary knowledge and skills to perform correct preventive maintenance procedures.

This two-day course investigates the electronic controls in modern heavy equipment.

This purpose of this two-day class is for service personnel to gain knowledge and develop skills on diesel engine fuel systems.

This full day course is designed for service personnel to gain knowledge of the operation of and features of the Cat Electronic Technician (ET) program and the Cat Service Information System (SIS).

Grade Control System Fundamentals Training

Event Details

SAVE MY SEAT

This two-day course is designed for service personnel to gain the necessary knowledge and skills to identify components and features of Oval and Elevated Sprocket Undercarriages.

This two-day course is designed for service technicians to gain knowledge and develop troubleshooting skills on Tier 4 Interim and Tier 4 Final Emissions Systems.

Empire’s two-day training course is designed for service personnel to gain knowledge and develop skills on diesel engines.

This full-day course is designed for advanced and entry level technicians to gain the knowledge and develop an in-depth understanding of the tools provided for effective electrical and hydraulic schematic reading.

This full-day course is designed for service personnel to gain knowledge of the navigation, operation and features of the Cat SIS 2.0 program.

This two-day course is designed for service personnel to gain knowledge and develop skills on basic hydraulic principles, components, functions, graphical symbols, and hydraulic systems used on machines.

This two-day course is designed for service personnel to gain knowledge and develop skills on powertrain systems.

A full-day training course that provides hands-on training with Caterpillar Electronic Technician (Cat ET), the factory-approved diagnostic software for electronically controlled Caterpillar engines and machines.

This two-day course introduces the concepts and benefits behind LSPC and PPPC hydraulic systems as used in hydraulic systems.

This two-day course is designed for service personnel to gain knowledge and develop skills on different parts of powertrain control systems.

This two-day course is designed for service technicians to gain knowledge and develop troubleshooting skills on heavy equipment electrical systems.

This one-day course will cover auto lubrication systems that are found on most mining equipment, such as trucks and loaders.

This two-day course is designed for service personnel to gain knowledge and develop skills on lower powertrain systems.

This two-day course is designed for service technicians to develop testing, troubleshooting and servicing skills of operator compartment A/C systems.

This full-day course is designed for service personnel to gain the necessary knowledge and skills to perform correct preventive maintenance procedures.

This two-day course investigates the electronic controls in modern heavy equipment.

This purpose of this two-day class is for service personnel to gain knowledge and develop skills on diesel engine fuel systems.

This full day course is designed for service personnel to gain knowledge of the operation of and features of the Cat Electronic Technician (ET) program and the Cat Service Information System (SIS).

Join The Waitlist

Subscribe For Events And Training Alerts

Get The Latest Empire News

WELCOME!